enum {
      kRC4KeySizeInBytes          = 8,                            /* size of an RC4 key */
      kRefNumUnknown              = 0
  };
  
  enum {
      kEnumDistinguishedNameBit   = 0,
      kEnumAliasBit               = 1,
      kEnumPseudonymBit           = 2,
      kEnumDNodeBit               = 3,
      kEnumInvisibleBit           = 4
  };
  
  /* Values of DirEnumChoices */
  enum {
      kEnumDistinguishedNameMask  = 1L << kEnumDistinguishedNameBit,
      kEnumAliasMask              = 1L << kEnumAliasBit,
      kEnumPseudonymMask          = 1L << kEnumPseudonymBit,
      kEnumDNodeMask              = 1L << kEnumDNodeBit,
      kEnumInvisibleMask          = 1L << kEnumInvisibleBit,
      kEnumAllMask                = (kEnumDistinguishedNameMask | kEnumAliasMask | kEnumPseudonymMask | kEnumDNodeMask | kEnumInvisibleMask)
  };
  
  typedef unsigned long                   DirEnumChoices;
  /* Values of DirSortOption */
  enum {
      kSortByName                 = 0,
      kSortByType                 = 1
  };
  
  /* Values of DirSortDirection */
  enum {
      kSortForwards               = 0,
      kSortBackwards              = 1
  };
  
  /* Values of DirMatchWith */
  enum {
      kMatchAll                   = 0,
      kExactMatch                 = 1,
      kBeginsWith                 = 2,
      kEndingWith                 = 3,
      kContaining                 = 4
  };
  
  typedef UInt8                           DirMatchWith;
  enum {
      kCurrentOCESortVersion      = 1
  };
  
  /*  Access controls are implemented on three levels:
   *      DNode, Record, and Attribute Type levels
   *  Some access control bits apply to the container itself, and some apply to its contents.
   *
   *  The Catalog Toolbox supports six functions.  These calls are:
   *  DSGetDNodeAccessControl : to get Access Controls at the DNode level
   *  DSGetRecordAccessControl  : to get Access Controls at the record level
   *  DSGetAttributeAccessControl : to get Access Privileges at the attribute type level
   * 
   *  The GetXXXAccessControl calls will return access control masks for various categories
   *  of users.  Please refer to the access control document for a description of the
   *  categories of users.  In general these are:
   *      ThisRecordOwner         - means the identity of the record itself
   *      Friends                  - means any one of the assigned friends for the record
   *      AuthenticatedInDNode     - means any valid user that is an authenticated entity
   *          in the DNode in which this record is located
   *      AuthenticatedInDirectory - means any valid authenticated catalog user
   *      Guest                    - means an unauthenticated user.
   *  Bit masks for various permitted access controls are defined below.
   *
   *  GetXXXAccessControl calls will return access control masks for various categories of
   *  users for this record. In addition they also return the level of access controls
   *  that the user (who is making the GetXXXAccessControl call) has for the DNode,
   *  record, or attribute type.
   *
   *  For records, the access control granted will be minimum of the DNode access
   *  control and record access control masks.  For example, to add an attribute type to a
   *  record, a user must have access control kCreateAttributeTypes at the record and
   *  DNode levels.  Similarly, at the attribute type level, access controls will be the
   *  minimum of the DNode, record, and attribute type access controls.
   *
   *  
   */
  /* access privileges bit numbers */
  enum {
      kSeeBit                     = 0,
      kAddBit                     = 1,
      kDeleteBit                  = 2,
      kChangeBit                  = 3,
      kRenameBit                  = 4,
      kChangePrivsBit             = 5,
      kSeeFoldersBit              = 6
  };
  
  /* Values of AccessMask */
  enum {
      kSeeMask                    = (1L << kSeeBit),
      kAddMask                    = (1L << kAddBit),
      kDeleteMask                 = (1L << kDeleteBit),
      kChangeMask                 = (1L << kChangeBit),
      kRenameMask                 = (1L << kRenameBit),
      kChangePrivsMask            = (1L << kChangePrivsBit),
      kSeeFoldersMask             = (1L << kSeeFoldersBit)
  };
  
  enum {
      kAllPrivs                   = (kSeeMask + kAddMask + kDeleteMask + kChangeMask + kRenameMask + kChangePrivsMask + kSeeFoldersMask),
      kNoPrivs                    = 0
  };
  
  /*
  
  kSupportsDNodeNumberBit:
  If this bit is set, a DNode can be referenced using DNodeNumbers. 
  RecordLocationInfo can be specified using DNodeNumber and PathName component can be nil. 
  If this bit is not set, a DNode can be referenced only by PathName to the DNode. In the 
  later case DNodeNumber component inside record location info must be set to zero.
  
  kSupportsRecordCreationIDBit:
  If this bit is set, a record can be referenced by specifying CreationID 
  in most catalog manager calls. If this bit is not set recordName and recordType are 
  required in the recordID specification for all catalog manager calls.
  
  kSupportsAttributeCreationIDBit:
  If this bit is set, an attribute value can be obtained by specifying it's 
  CreationID in Lookup call staring point and also can be used in operations 
  like DeleteAttributeValue and ChangeAttributeValue an Attribute can be 
  specified by AttributeType and CreationID.
  
  *************************************************************************
  Implicit assumption with creationID's and dNodeNumbers are, when supported
  they are persistent and will preserved across boots and life of the system.
  *************************************************************************
  
  Following three bits are for determining the sort order in enumeration.
  kSupportsMatchAllBit:
  If this bit is set, enumeration of all the records is supported
  
  kSupportsBeginsWithBit:
  If this bit is set, enumeration of records matching prefix (e.g. Begin with abc)
  is supported
  
  kSupportsExactMatchBit:
  If this bit is set, existence of a record matching exact matchNameString and recordType
  is supported.
  
  kSupportsEndsWithBit:
  If this bit is set, enumeration of records matching suffix (e.g. end with abc)
  is supported.
  
  kSupportsContainsBit:
  If this bit is set, enumeration of records containing a matchNameString (e.g. containing abc)
  is supported
  
  Implicit assumption in all these is, a record type can be specified either as one of the above or
  a type list(more then one) to match exact type.
  The Following four bits will indicate sort ordering in enumeration.
  
  kSupportsOrderedEnumerationBit:
  If this bit is set, Enumerated records or in some order possibly in name order.
  
  kCanSupportNameOrderBit:
  If this is set, catalog will support sortbyName option in Enumerate.
  
  kCanSupportTypeOrderBit:
  If this bit is set, catalog will support sortbyType option in enumearte.
  
  kSupportSortBackwardsBit:
  If this bit is set, catalog supports backward sorting.
  
  kSupportIndexRatioBit:
  If this bit is set, it indicates that enumeration will return approximate position
  of a record (percentile) among all records.
  
  kSupportsEnumerationContinueBit:
  If this bit is set, catalog supports enumeration continue.
  
  kSupportsLookupContinueBit:
  If this bit is set, catalog supports lookup continue.
  
  kSupportsEnumerateAttributeTypeContinueBit:
  If this bit is set, catalog supports EnumerateAttributeType continue.
  
  kSupportsEnumeratePseudonymContinueBit:
  If this bit is set, catalog supports EnumeratePseudonym continue.
  
  kSupportsAliasesBit:
  If this bit is set, catalog supports create/delte/enumerate 
  of Alias Records.
  
  kSupportPseudonymBit: 
  If this bit is set, catalog supports create/delte/enumerate of 
  pseudonyms for a record.
  
  kSupportsPartialPathNameBit:
  If this bit is set, catalog nodes can be specified using DNodeNumber of a 
  intermediate DNode and a partial name starting from that DNode to the intended 
  DNode.
  
  kSupportsAuthenticationBit:
  If this bit is set, catalog supports authentication manager calls.
  
  kSupportsProxiesBit:
  If this bit is set, catalog supports proxy related calls in authentication manager. 
  
  kSupportsFindRecordBit:
  If this bit is set, catalog supports find record call.
  
  Bits and corresponding masks are as defined below.
  */
  enum {
      kSupportsDNodeNumberBit     = 0,
      kSupportsRecordCreationIDBit = 1,
      kSupportsAttributeCreationIDBit = 2,
      kSupportsMatchAllBit        = 3,
      kSupportsBeginsWithBit      = 4,
      kSupportsExactMatchBit      = 5,
      kSupportsEndsWithBit        = 6,
      kSupportsContainsBit        = 7,
      kSupportsOrderedEnumerationBit = 8,
      kCanSupportNameOrderBit     = 9,
      kCanSupportTypeOrderBit     = 10,
      kSupportSortBackwardsBit    = 11,
      kSupportIndexRatioBit       = 12,
      kSupportsEnumerationContinueBit = 13,
      kSupportsLookupContinueBit  = 14,
      kSupportsEnumerateAttributeTypeContinueBit = 15,
      kSupportsEnumeratePseudonymContinueBit = 16,
      kSupportsAliasesBit         = 17,
      kSupportsPseudonymsBit      = 18,
      kSupportsPartialPathNamesBit = 19,
      kSupportsAuthenticationBit  = 20,
      kSupportsProxiesBit         = 21,
      kSupportsFindRecordBit      = 22
  };
  
  /* values of DirGestalt */
  enum {
      kSupportsDNodeNumberMask    = 1L << kSupportsDNodeNumberBit,
      kSupportsRecordCreationIDMask = 1L << kSupportsRecordCreationIDBit,
      kSupportsAttributeCreationIDMask = 1L << kSupportsAttributeCreationIDBit,
      kSupportsMatchAllMask       = 1L << kSupportsMatchAllBit,
      kSupportsBeginsWithMask     = 1L << kSupportsBeginsWithBit,
      kSupportsExactMatchMask     = 1L << kSupportsExactMatchBit,
      kSupportsEndsWithMask       = 1L << kSupportsEndsWithBit,
      kSupportsContainsMask       = 1L << kSupportsContainsBit,
      kSupportsOrderedEnumerationMask = 1L << kSupportsOrderedEnumerationBit,
      kCanSupportNameOrderMask    = 1L << kCanSupportNameOrderBit,
      kCanSupportTypeOrderMask    = 1L << kCanSupportTypeOrderBit,
      kSupportSortBackwardsMask   = 1L << kSupportSortBackwardsBit,
      kSupportIndexRatioMask      = 1L << kSupportIndexRatioBit,
      kSupportsEnumerationContinueMask = 1L << kSupportsEnumerationContinueBit,
      kSupportsLookupContinueMask = 1L << kSupportsLookupContinueBit,
      kSupportsEnumerateAttributeTypeContinueMask = 1L << kSupportsEnumerateAttributeTypeContinueBit,
      kSupportsEnumeratePseudonymContinueMask = 1L << kSupportsEnumeratePseudonymContinueBit,
      kSupportsAliasesMask        = 1L << kSupportsAliasesBit,
      kSupportsPseudonymsMask     = 1L << kSupportsPseudonymsBit,
      kSupportsPartialPathNamesMask = 1L << kSupportsPartialPathNamesBit,
      kSupportsAuthenticationMask = 1L << kSupportsAuthenticationBit,
      kSupportsProxiesMask        = 1L << kSupportsProxiesBit,
      kSupportsFindRecordMask     = 1L << kSupportsFindRecordBit
  };
  
  /* Values of AuthLocalIdentityOp */
  enum {
      kAuthLockLocalIdentityOp    = 1,
      kAuthUnlockLocalIdentityOp  = 2,
      kAuthLocalIdentityNameChangeOp = 3
  };
  
  /* Values of AuthLocalIdentityLockAction */
  enum {
      kAuthLockPending            = 1,
      kAuthLockWillBeDone         = 2
  };
  
  /* Values of AuthNotifications */
  enum {
      kNotifyLockBit              = 0,
      kNotifyUnlockBit            = 1,
      kNotifyNameChangeBit        = 2
  };
  
  enum {
      kNotifyLockMask             = 1L << kNotifyLockBit,
      kNotifyUnlockMask           = 1L << kNotifyUnlockBit,
      kNotifyNameChangeMask       = 1L << kNotifyNameChangeBit
  };
  
  enum {
      kPersonalDirectoryFileCreator = FOUR_CHAR_CODE('kl03'),
      kPersonalDirectoryFileType  = FOUR_CHAR_CODE('pabt'),
      kBusinessCardFileType       = FOUR_CHAR_CODE('bust'),
      kDirectoryFileType          = FOUR_CHAR_CODE('dirt'),
      kDNodeFileType              = FOUR_CHAR_CODE('dnod'),
      kDirsRootFileType           = FOUR_CHAR_CODE('drtt'),
      kRecordFileType             = FOUR_CHAR_CODE('rcrd')
  };
  
  typedef unsigned short                  DirSortOption;
  typedef unsigned short                  DirSortDirection;
  typedef unsigned long                   AccessMask;
  typedef unsigned long                   DirGestalt;
  typedef unsigned long                   AuthLocalIdentityOp;
  typedef unsigned long                   AuthLocalIdentityLockAction;
  typedef unsigned long                   AuthNotifications;
  
  struct DNodeID {
      DNodeNum                        dNodeNumber;                /* dNodenumber  */
      long                            reserved1;
      RStringPtr                      name;
      long                            reserved2;
  };
  typedef struct DNodeID                  DNodeID;
  
  struct DirEnumSpec {
      DirEnumChoices                  enumFlag;
      unsigned short                  indexRatio;                 /* Approx Record Position between 1 and 100 If supported, 0 If not supported */
      union {
          LocalRecordID                   recordIdentifier;
          DNodeID                         dNodeIdentifier;
      }                                 u;
  };
  typedef struct DirEnumSpec              DirEnumSpec;
  
  struct DirMetaInfo {
      unsigned long                   info[4];
  };
  typedef struct DirMetaInfo              DirMetaInfo;
  
  struct SLRV {
      ScriptCode                      script;                     /*   Script code in which entries are sorted */
      short                           language;                   /*   Language code in which entries are sorted */
      short                           regionCode;                 /*   Region code in which entries are sorted */
      short                           version;                    /*  version of oce sorting software */
  };
  typedef struct SLRV                     SLRV;
  /* Catalog types and operations */
  /* unique identifier for an identity */
  
  typedef unsigned long                   AuthIdentity;
  /* Umbrella LocalIdentity */
  typedef AuthIdentity                    LocalIdentity;
  /* A DES key is 8 bytes of data */
  
  struct DESKey {
      unsigned long                   a;
      unsigned long                   b;
  };
  typedef struct DESKey                   DESKey;
  
  typedef Byte                            RC4Key[8];
  typedef unsigned long                   AuthKeyType;
  /* key type followed by its data */
  
  struct AuthKey {
      AuthKeyType                     keyType;
      union {
          DESKey                          des;
          RC4Key                          rc4;
      }                                 u;
  };
  typedef struct AuthKey                  AuthKey;
  typedef AuthKey *                       AuthKeyPtr;
  typedef union AuthParamBlock            AuthParamBlock;
  
  typedef AuthParamBlock *                AuthParamBlockPtr;
  /* Fix parameter passing convention (#1274062) ggs, 8-7-95 */
  typedef CALLBACK_API( void , AuthIOCompletionProcPtr )(AuthParamBlockPtr paramBlock);
  /*
      WARNING: AuthIOCompletionProcPtr uses register based parameters under classic 68k
               and cannot be written in a high-level language without 
               the help of mixed mode or assembly glue.
  */
  typedef REGISTER_UPP_TYPE(AuthIOCompletionProcPtr)              AuthIOCompletionUPP;
  

***************************************************************************

          Authentication Manager operations 
  
  *****************************************************************************/
  /*
  kAuthResolveCreationID:
  userRecord will contain the user information whose creationID has to be
  returned. A client must make this call when he does not know the creaitionID.
  The creationID must be set to nil before making the call. The server will attempt
  to match the recordid's in the data base which match the user name and
  type in the record.  Depending on number of matchings, following
  results will be returned.
  Exactly One Match : CreationID in RecordID and also in buffer (if buffer is given)
  totalMatches = actualMatches = 1.
  > 1 Match:
      Buffer is Large Enough:
      totalMatches = actualMatches
      Buffer will contain all the CIDs, kOCEAmbiguousMatches error.
  > 1 Match:
      Buffer is not Large Enough:
      totalMatches > actualMatches
      Buffer will contain all the CIDs (equal to actualMatches), daMoreDataError error.
  0 Matches:
   kOCENoSuchRecord error
  */
  
  struct AuthResolveCreationIDPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     userRecord;                 /*  --> OCE name(Record) of the user */
      unsigned long                   bufferLength;               /*  --> Buffer Size to hold duplicate Info */
      void *                          buffer;                     /*  --> Buffer  to hold duplicate Info */
      unsigned long                   totalMatches;               /* <--  Total Number of matching names found */
      unsigned long                   actualMatches;              /* <--  Number of matches returned in the buffer */
  };
  typedef struct AuthResolveCreationIDPB  AuthResolveCreationIDPB;
  /*
  kAuthBindSpecificIdentity:
  userRecord will contain the user information whose identity has to be
  verified. userKey will contain the userKey. An Identity is returned which
  binds the key and the userRecord. The identity returned can be used in the 'identity'
  field in the header portion (AuthParamHeader) for authenticating the Catalog and
  Authentication manager calls.
  */
  
  struct AuthBindSpecificIdentityPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      AuthIdentity                    userIdentity;               /* <--  binding identity */
      RecordIDPtr                     userRecord;                 /*  --> OCE name(Record) of the user */
      AuthKeyPtr                      userKey;                    /*  --> OCE Key for the user */
  };
  typedef struct AuthBindSpecificIdentityPB AuthBindSpecificIdentityPB;
  /*
  kAuthUnbindSpecificIdentity:
  This call will unbind the userRecord and key which were bind earlier.
  */
  
  struct AuthUnbindSpecificIdentityPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      AuthIdentity                    userIdentity;               /*  --> identity to be deleted */
  };
  typedef struct AuthUnbindSpecificIdentityPB AuthUnbindSpecificIdentityPB;
  
  /*
  kAuthGetSpecificIdentityInfo:
  This call will return the userRecord for the given identity. Note: key is not
  returned because this would compromise security.
  */
  
  struct AuthGetSpecificIdentityInfoPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      AuthIdentity                    userIdentity;               /*  --> identity of initiator */
      RecordIDPtr                     userRecord;                 /* <--  OCE name(Record) of the user */
  };
  typedef struct AuthGetSpecificIdentityInfoPB AuthGetSpecificIdentityInfoPB;
  
  /*
  kAuthAddKey:
  userRecord will contain the user information whose identity has to be
  created. userKey will point to the key to be created. password points to
  an RString containing the password used to generate the key.
  */
  
  struct AuthAddKeyPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     userRecord;                 /*  --> OCE name(Record) of the user */
      AuthKeyPtr                      userKey;                    /* <--  OCE Key for the user */
      RStringPtr                      password;                   /*  --> Pointer to password string */
  };
  typedef struct AuthAddKeyPB             AuthAddKeyPB;
  /*
  kAuthChangeKey:
  userRecord will contain the user information whose identity has to be
  created. userKey will point to the key to be created. password points to
  an RString containing the password used to generate the key.
  */
  
  struct AuthChangeKeyPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     userRecord;                 /*  --> OCE name(Record) of the user */
      AuthKeyPtr                      userKey;                    /* <--  New OCE Key for the user */
      RStringPtr                      password;                   /*  -->Pointer to the new password string */
  };
  typedef struct AuthChangeKeyPB          AuthChangeKeyPB;
  /*
  AuthDeleteKey:
  userRecord will contain the user information whose Key has to be deleted.
  */
  
  struct AuthDeleteKeyPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     userRecord;                 /*  --> OCE name(Record) of the user */
  };
  typedef struct AuthDeleteKeyPB          AuthDeleteKeyPB;
  /* AuthPasswordToKey: Converts an RString into a key. */
  
  struct AuthPasswordToKeyPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     userRecord;                 /*  --> OCE name(Record) of the user */
      AuthKeyPtr                      key;                        /* <--  */
      RStringPtr                      password;                   /*  -->Pointer to the new password string */
  };
  typedef struct AuthPasswordToKeyPB      AuthPasswordToKeyPB;
  /*
  kAuthGetCredentials:
  userRecord will contain the user information whose identity has to be
  kMailDeletedMask. keyType (e.g. asDESKey) will indicate what type of key has to
  be deleted.
  */
  
  struct AuthGetCredentialsPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      AuthIdentity                    userIdentity;               /*  --> identity of initiator */
      RecordIDPtr                     recipient;                  /*  --> OCE name of recipient */
      AuthKeyPtr                      sessionKey;                 /* <--  session key */
      UTCTime                         expiry;                     /* <--> desired/actual expiry */
      unsigned long                   credentialsLength;          /* <--> max/actual credentials size */
      void *                          credentials;                /* <--  buffer where credentials are returned */
  };
  typedef struct AuthGetCredentialsPB     AuthGetCredentialsPB;
  /*
  AuthDecryptCredentialsPB:
  Changes:
  userKey is changed userIdentity.
  userRecord is changed to initiatorRecord. User must supply buffer
  to hold initiatorRecord.
  agentList has changed to agent. There wil be no call back.
  User must supply buffer to hold agent Record.
  An additional boolean parameter 'hasAgent' is included.
  Toolbox will set this if an 'Agent' record is found in the
  credentials. If RecordIDPtr is 'nil', no agent record will
  be copied. However user can examine 'hasAgent', If true user
  can reissue this call with apprpriate buffer for getting a recordID.
  agent has changed to intermediary.  User must supply buffer to hold 
  intermediary Record.  The toolbox will set 'hasIntermediary' if an
  'intermediary' record is found in the credentials. 
  */
  
  struct AuthDecryptCredentialsPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      AuthIdentity                    userIdentity;               /*  --> user's Identity */
      RecordIDPtr                     initiatorRecord;            /* <--  OCE name of the initiator */
      AuthKeyPtr                      sessionKey;                 /* <--  session key */
      UTCTime                         expiry;                     /* <--  credentials expiry time */
      unsigned long                   credentialsLength;          /*  --> actual credentials size */
      void *                          credentials;                /*  --> credentials to be decrypted */
      UTCTime                         issueTime;                  /* <--  credentials expiry time */
      Boolean                         hasIntermediary;            /* <--  if true, An intermediary Record was found in credentials */
      Boolean                         filler1;
      RecordIDPtr                     intermediary;               /* <--  recordID of the intermediary */
  };
  typedef struct AuthDecryptCredentialsPB AuthDecryptCredentialsPB;
  
  struct AuthMakeChallengePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      AuthKeyPtr                      key;                        /*  --> UnEncrypted SessionKey */
      void *                          challenge;                  /* <--  Encrypted Challenge */
      unsigned long                   challengeBufferLength;      /*  ->length of challenge buffer */
      unsigned long                   challengeLength;            /*  <-length of Encrypted Challenge */
  };
  typedef struct AuthMakeChallengePB      AuthMakeChallengePB;
  
  struct AuthMakeReplyPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      AuthKeyPtr                      key;                        /*  --> UnEncrypted SessionKey */
      void *                          challenge;                  /*  --> Encrypted Challenge */
      void *                          reply;                      /* <--  Encrypted Reply */
      unsigned long                   replyBufferLength;          /*  -->length of challenge buffer */
      unsigned long                   challengeLength;            /*  --> length of Encrypted Challenge */
      unsigned long                   replyLength;                /* <--  length of Encrypted Reply */
  };
  typedef struct AuthMakeReplyPB          AuthMakeReplyPB;
  
  struct AuthVerifyReplyPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      AuthKeyPtr                      key;                        /*  --> UnEncrypted SessionKey */
      void *                          challenge;                  /*  --> Encrypted Challenge */
      void *                          reply;                      /*  --> Encrypted Reply */
      unsigned long                   challengeLength;            /*  --> length of Encrypted Challenge */
      unsigned long                   replyLength;                /*  --> length of Encrypted Reply */
  };
  typedef struct AuthVerifyReplyPB        AuthVerifyReplyPB;
  
  /*
  kAuthGetUTCTime:
  RLI will contain a valid RLI for a cluster server.
  UTC(GMT) time from one of the cluster server will be returned.
  An 'offSet' from UTC(GMT) to Mac Local Time will also be returned.
  If RLI is nil Map DA is used to determine UTC(GMT).
  Mac Local Time = theUTCTime + theUTCOffset.
  */
  
  struct AuthGetUTCTimePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      PackedRLIPtr                    pRLI;                       /*  --> packed RLI of the Node, whose server's UTC is requested */
      UTCTime                         theUTCTime;                 /* <--  current UTC(GMT) Time utc seconds since 1/1/1904 */
      UTCOffset                       theUTCOffset;               /* <--  offset from UTC(GMT) seconds EAST of Greenwich */
  };
  typedef struct AuthGetUTCTimePB         AuthGetUTCTimePB;
  
  /*
  kAuthMakeProxy:
  A user represented bu the 'userIdentity' can make a proxy using this call.
  'recipient' is the RecordID of the recipient whom user is requesting proxy.
  'intermediary' is the RecordID of the intermediary holding proxy for the user.
  'firstValid' is time at which proxy becomes valid.
  'expiry' is the time at which proxy must expire.
  'proxyLength' will have the length of the buffer pointed by 'proxy' as input.
  When the call completes, it will hold the actual length of proxy. If the
  call completes 'kOCEMoreData' error, client can reissue the call with the
  buffer size as 'proxyLength' returned.
  expiry is a suggestion, and may be adjusted to be earlier by the ADAP/OCE server.
  The 'proxy' obtained like this might be used by the 'intermediary' to obtain credentials
  for the server using TradeProxyForCredentials call.
  authDataLength and authData are intended for possible future work, but are
  ignored for now.
  */
  
  struct AuthMakeProxyPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      AuthIdentity                    userIdentity;               /*  --> identity of principal */
      RecordIDPtr                     recipient;                  /*  --> OCE name of recipient */
      UTCTime                         firstValid;                 /*  --> time at which proxy becomes valid */
      UTCTime                         expiry;                     /*  --> time at which proxy expires */
      unsigned long                   authDataLength;             /*  --> size of authorization data */
      void *                          authData;                   /*  --> pointer to authorization data */
      unsigned long                   proxyLength;                /* <--> max/actual proxy size */
      void *                          proxy;                      /* <--> buffer where proxy is returned */
      RecordIDPtr                     intermediary;               /*  --> RecordID of intermediary */
  };
  typedef struct AuthMakeProxyPB          AuthMakeProxyPB;
  /*
  kAuthTradeProxyForCredentials:
  Using this call, intermediary holding a 'proxy' for a recipient may obtain credentials
  for that recipient. 'userIdentity' is the identity for the 'intermediary'.
  'recipient' is the RecordID for whom credetials are requested.
  'principal' is the RecordID of the user who created the proxy.
  'proxyLength' is the length of data pointed by 'proxy.
  If the call is succesfull, credentials will be returned in the
  buffer pointed by 'credentials'. 'expiry' is the desired expiry time at input.
  When call succeds this will have expiry time of credentials.
  This is very similar to GetCredentials except that we (of course) need the proxy,
  but we also need the name of the principal who created the proxy.
  */
  
  struct AuthTradeProxyForCredentialsPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      AuthIdentity                    userIdentity;               /*  --> identity of intermediary */
      RecordIDPtr                     recipient;                  /*  --> OCE name of recipient */
      AuthKeyPtr                      sessionKey;                 /* <--  session key */
      UTCTime                         expiry;                     /* <--> desired/actual expiry */
      unsigned long                   credentialsLength;          /* <--> max/actual credentials size */
      void *                          credentials;                /* <--> buffer where credentials are returned */
      unsigned long                   proxyLength;                /*  --> actual proxy size */
      void *                          proxy;                      /*  --> buffer containing proxy */
      RecordIDPtr                     principal;                  /*  --> RecordID of principal */
  };
  typedef struct AuthTradeProxyForCredentialsPB AuthTradeProxyForCredentialsPB;
  /* API for Local Identity Interface */
  /*
  AuthGetLocalIdentityPB:
  A Collaborative application intended to work under the umbrella of LocalIdentity
  for the OCE toolbox will have to make this call to obtain LocalIdentity.
  If LocalIdentity has not been setup, then application will get
  'kOCEOCESetupRequired.'. In this case application should put the dialog
  recommended by the OCE Setup document and guide the user through OCE Setup.
  If the OCESetup contains local identity, but user has not unlocked, it will get
  kOCELocalAuthenticationFail. In this case application should use SDPPromptForLocalIdentity
  to prompt user for the password.
  If a backGround application or stand alone code requires LocalIdentity, if it gets the
  OSErr from LocalIdentity and can not call SDPPromptForLocalIdentity, it should it self
  register with the toolbox using kAuthAddToLocalIdentityQueue call. It will be notified
  when a LocalIdentity gets created by a foreground application.
  */
  
  struct AuthGetLocalIdentityPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      LocalIdentity                   theLocalIdentity;           /* <--  LocalIdentity */
  };
  typedef struct AuthGetLocalIdentityPB   AuthGetLocalIdentityPB;
  /*
  kAuthUnlockLocalIdentity:
  The LocalIdentity can be created using this call.
  The userName and password correspond to the LocalIdentity setup.
  If the password matches, then collabIdentity will be returned.
  Typically SDPPromptForLocalIdentity call will make this call.
  All applications which are registered through kAuthAddToLocalIdentityQueue
  will be notified.
  */
  
  struct AuthUnlockLocalIdentityPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      LocalIdentity                   theLocalIdentity;           /* <--  LocalIdentity */
      RStringPtr                      userName;                   /*  --> userName */
      RStringPtr                      password;                   /*  -->user password */
  };
  typedef struct AuthUnlockLocalIdentityPB AuthUnlockLocalIdentityPB;
  /*
  kAuthLockLocalIdentity:
  With this call existing LocalIdentity can be locked. If the ASDeleteLocalIdetity
  call fails with 'kOCEOperationDenied' error, name will contain the application which
  denied the operation. This name will be supplied by the application
  when it registered through kAuthAddToLocalIdentityQueue call
  */
  
  struct AuthLockLocalIdentityPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      LocalIdentity                   theLocalIdentity;           /*  --> LocalIdentity */
      StringPtr                       name;                       /* <--  name of the app which denied delete */
  };
  typedef struct AuthLockLocalIdentityPB  AuthLockLocalIdentityPB;
  typedef CALLBACK_API( Boolean , NotificationProcPtr )(long clientData, AuthLocalIdentityOp callValue, AuthLocalIdentityLockAction actionValue, LocalIdentity identity);
  typedef STACK_UPP_TYPE(NotificationProcPtr)                     NotificationUPP;
  
  typedef NotificationUPP                 NotificationProc;
  /*
  kAuthAddToLocalIdentityQueue:
  An application requiring notification of locking/unlocking of the
  LocalIdentity can install itself using this call. The function provided
  in 'notifyProc' will be called whenever the requested event happens.
  When an AuthLockLocalIdentity call is made to the toolbox, the notificationProc
  will be called with 'kAuthLockPending'. The application may refuse the lock by returning
  a 'true' value. If all the registered entries return 'false' value, locking will be done
  successfully. Otherwise 'kOCEOperationDenied' error is returned to the caller. The appName
  (registered with the notificationProc) of the application which denied locking is also
  returned to the caller making the AuthLockIdentity call.
  */
  
  struct AuthAddToLocalIdentityQueuePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      NotificationUPP                 notifyProc;                 /*  --> notification procedure */
      AuthNotifications               notifyFlags;                /*  --> notifyFlags */
      StringPtr                       appName;                    /*  --> name of application to be returned in Delete/Stop */
  };
  typedef struct AuthAddToLocalIdentityQueuePB AuthAddToLocalIdentityQueuePB;
  /*
  kAuthRemoveFromLocalIdentityQueue:*/
  
  struct AuthRemoveFromLocalIdentityQueuePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      NotificationUPP                 notifyProc;                 /*  --> notification procedure */
  };
  typedef struct AuthRemoveFromLocalIdentityQueuePB AuthRemoveFromLocalIdentityQueuePB;
  /*
  kAuthSetupLocalIdentity:
  The LocalIdentity can be Setup using this call.
  The userName and password correspond to the LocalIdentity setup.
  If a LocalIdentity Setup already exists 'kOCELocalIdentitySetupExists' error
  will be returned.
  */
  
  struct AuthSetupLocalIdentityPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      long                            aReserved;                  /*  --  */
      RStringPtr                      userName;                   /*  --> userName */
      RStringPtr                      password;                   /*  -->user password */
  };
  typedef struct AuthSetupLocalIdentityPB AuthSetupLocalIdentityPB;
  /*
  kAuthChangeLocalIdentity:
  An existing LocalIdentity  Setup can be changed using this call.
  The userName and password correspond to the LocalIdentity setup.
  If a LocalIdentity Setup does not exists 'kOCEOCESetupRequired' error
  will be returned. The user can use  kAuthSetupLocalIdentity call to setit up.
  If the 'password' does not correspond to the existing setup, 'kOCELocalAuthenticationFail'
  OSErr will be returned. If successful, LocalID will have new name as 'userName' and
  password as 'newPassword' and if any applications has installed into 
  LocalIdentityQueue with kNotifyNameChangeMask set, it will be notified with 
  kAuthLocalIdentityNameChangeOp action value. 
  
  */
  
  struct AuthChangeLocalIdentityPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      long                            aReserved;                  /*  --  */
      RStringPtr                      userName;                   /*  --> userName */
      RStringPtr                      password;                   /*  --> current password */
      RStringPtr                      newPassword;                /*  --> new password */
  };
  typedef struct AuthChangeLocalIdentityPB AuthChangeLocalIdentityPB;
  /*
  kAuthRemoveLocalIdentity:
  An existing LocalIdentity  Setup can be removed using this call.
  The userName and password correspond to the LocalIdentity setup.
  If a LocalIdentity Setup does not exists 'kOCEOCESetupRequired' error
  will be returned.
  If the 'password' does not correspond to the existing setup, 'kOCELocalAuthenticationFail'
  OSErr will be returned. If successful, LocalIdentity will be removed from the OCE Setup.
  This is a very distructive operation, user must be warned enough before actually making
  this call.
  */
  
  struct AuthRemoveLocalIdentityPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      long                            aReserved;                  /*  --  */
      RStringPtr                      userName;                   /*  --> userName */
      RStringPtr                      password;                   /*  --> current password */
  };
  typedef struct AuthRemoveLocalIdentityPB AuthRemoveLocalIdentityPB;
  /*
  kOCESetupAddDirectoryInfo:
  Using this call identity for a catalog can be setup under LocalIdentity umbrella.
  ASCreateLocalIdentity should have been done succesfully before making this call.    
  directoryRecordCID -> is the record creationID obtained when DirAddOCEDirectory or
  DirAddDSAMDirectory call was made.
  rid-> is the recordID in which the identity for the catalog will be established.
  password-> the password associated with the rid in the catalog world.
  */
  
  struct OCESetupAddDirectoryInfoPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      CreationID                      directoryRecordCID;         /*  --> CreationID for the catalog */
      RecordIDPtr                     recordID;                   /*  --> recordID for the identity */
      RStringPtr                      password;                   /*  --> password in the catalog world */
  };
  typedef struct OCESetupAddDirectoryInfoPB OCESetupAddDirectoryInfoPB;
  /*
  kOCESetupChangeDirectoryInfo:
  Using this call an existing identity for a catalog under LocalIdentity umbrella
  can be changed.
  ASCreateLocalIdentity should have been done succesfully before making this call.
  directoryRecordCID -> is the record creationID obtained when DirAddOCEDirectory or
  DirAddDSAMDirectory call was made.
  rid-> is the recordID in which the identity for the catalog will be established.
  password-> the password associated with the rid in the catalog world.
  newPassword -> the new password for the catalog
  */
  
  struct OCESetupChangeDirectoryInfoPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      CreationID                      directoryRecordCID;         /*  --> CreationID for the catalog */
      RecordIDPtr                     recordID;                   /*  --> recordID for the identity */
      RStringPtr                      password;                   /*  --> password in the catalog world */
      RStringPtr                      newPassword;                /*  --> new password in the catalog */
  };
  typedef struct OCESetupChangeDirectoryInfoPB OCESetupChangeDirectoryInfoPB;
  /*
  kOCESetupRemoveDirectoryInfo:
  Using this call an existing identity for a catalog under LocalIdentity umbrella
  can be changed.
  ASCreateLocalIdentity should have been done succesfully before making this call.
  directoryRecordCID -> is the record creationID obtained when DirAddOCEDirectory or
  */
  
  struct OCESetupRemoveDirectoryInfoPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      CreationID                      directoryRecordCID;         /*  --> CreationID for the catalog */
  };
  typedef struct OCESetupRemoveDirectoryInfoPB OCESetupRemoveDirectoryInfoPB;
  /*
  kOCESetupGetDirectoryInfo:
  Using this call info on an existing identity for a particular catalog under LocalIdentity umbrella
  can be obtained.
  For the specified catalog 'directoryName' and 'discriminator', rid and nativeName will
  returned. Caller must provide appropriate buffer to get back rid and nativeName.
  'password' will be returned  for  non-ADAP Catalogs.
  */
  
  struct OCESetupGetDirectoryInfoPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      AuthIOCompletionUPP             ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      DirectoryNamePtr                directoryName;              /*  --> catalog name */
      DirDiscriminator                discriminator;              /*  --> discriminator for the catalog */
      RecordIDPtr                     recordID;                   /* <--  rid for the catalog identity */
      RStringPtr                      nativeName;                 /* <--  user name in the catalog world */
      RStringPtr                      password;                   /* <--  password in the catalog world */
  };
  typedef struct OCESetupGetDirectoryInfoPB OCESetupGetDirectoryInfoPB;
  

***************************************************************************

          Catalog Manager operations
  
  *****************************************************************************/
  typedef union DirParamBlock             DirParamBlock;
  
  typedef DirParamBlock *                 DirParamBlockPtr;
  typedef CALLBACK_API( void , DirIOCompletionProcPtr )(DirParamBlockPtr paramBlock);
  /*
      WARNING: DirIOCompletionProcPtr uses register based parameters under classic 68k
               and cannot be written in a high-level language without 
               the help of mixed mode or assembly glue.
  */
  typedef REGISTER_UPP_TYPE(DirIOCompletionProcPtr)               DirIOCompletionUPP;
  /* AddRecord */
  
  struct DirAddRecordPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     aRecord;                    /*  --> CreationID returned here */
      Boolean                         allowDuplicate;             /*  --> */
      Boolean                         filler1;
  };
  typedef struct DirAddRecordPB           DirAddRecordPB;
  
  /* DeleteRecord */
  
  struct DirDeleteRecordPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     aRecord;                    /*  --> */
  };
  typedef struct DirDeleteRecordPB        DirDeleteRecordPB;
  /* aRecord must contain valid PackedRLI and a CreationID. */
  
  

*******************************************************************************

  
  /*
  DirEnumerate:
  This call can be used to enumerate both DNodes and records under a specified
  DNode. A DNode is specified by the PackedRLIPtr 'aRLI'.
  
  startingPoint indicates where to start the enumeration.  Initially,
  it should be set to a value of nil.  After some records are enumerated,
  the client can issue the call again with the same aRLI and recordName and
  typeList. The last received DirEnumSpec in the startingPoint field.  The server
  will continue the enumeration from that record on. if user wants to get back the
  value specified in the startingRecord also, the Boolean 'includeStartingPoint'
  must be set to 'true'. If this is set to 'false', records specified after the
  startingPoint record will be returned.
  
  sortBy indicates to the server to return the records that match in name-first
  or type-first order.  sortDirection indicates to the server to search in forward
  or backward sort order for RecordIDs Specified.
  
  RecordIDS and Enumeration Criteria:
  
  PackedRLIPtr parameter 'aRLI' will be accepted for DNode
  specification.
  
  One RStringPtr 'nameMatchString' is provided. User is allowed to
  specify a wild card in the name. WildCard specification is specified in 
  matchNameHow parameter and possible values are defined in DirMatchWith Enum.
  
  'typeCount' parameter indicate how many types are in the 'typeList'.
  
  'typeList' parmeter is a pointer to an RString array of size 'typeCount'.
  
  If 'typeCount' is exactly equal to one, a wild card can be specified
  for the entity type; otherwise types have to be completely specified.
  WildCard specification is specified in  matchNameHow parameter
   and possible values are defined in DirMatchWith Enum.
  
  A nil value for 'startingPoint' is allowed when sortDirection specified
  is 'kSortBackwards'. This was not allowed previously.
  
  'enumFlags' parameter is a bit field. The following bits can be set:
      kEnumDistinguishedNameMask to get back records in the cluster data base.
      kEnumAliasMask to get back record aliases
      kEnumPseudonymMask to get back record pseudonyms
      kEnumDNodeMask to get back any children dNodes for the DNode specified in the
      'aRLI' parameter.
      kEnumForeignDNodeMask to get back any children dNodes which have ForeignDnodes in the
      dNode specified in the 'aRLI' parameter.
  
      kEnumAll is combination of all five values and can be used to enumerate
      everything under a specified DNode.
  
  The results returned for each element will consist of a DirEnumSpec.
  The DirEnumSpec contains 'enumFlag' which indicates the type of entity and a
  union which will have either DNodeID or LocalRecordID depending on the value of 'enumFlag'.
  The 'enumFlag'  will indicate whether the returned element is a
  record(kEnumDistinguishedNameMask bit) or a alias(kEnumAliasMask bit) or a
  Pseudonym(kEnumPseudonymMask) or a child DNode(kEnumDNodeMask bit).  If the 'enumFlag' value
  is kEnumDnodeMask, it indicates the value returned in the union is a DNodeID (i.e. 'dNodeNumber'
  is the 'dNodeNumber' of the child dnode(if the catalog supports dNodeNumbers, otherwise
  this will be set to zero). The name will be the child dnode name. For other values of the
  'enumFlag', the value in the union will be LocalRecordID. In addition to kEnumDnodeMask it is
  possible that kEnumForeignDNodeMask is also set. This is an advisory bit and application must make
  it's own decision before displaying these records. If catalog supports kSupportIndexRatioMask, it
  may also return the relative position of the record (percentile of total records) in the 
  indexRatio field in EnumSpec.
  
  responseSLRV will contain the script, language, region and version of the oce sorting software.
  The results will be collected in the 'getBuffer' supplied by the user.
  If buffer can not hold all the data returned 'kOCEMoreData' error will be returned.
  
  If user receives 'noErr' or 'kOCEMoreData', buffer will contain valid results. A user
  can extract the results in the 'getBuffer' by making DirEnumerateParse' call.
  */
  
  struct DirEnumerateGetPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      PackedRLIPtr                    aRLI;                       /*  --> an RLI specifying the cluster to be enumerated */
      DirEnumSpec *                   startingPoint;              /*  --> */
      DirSortOption                   sortBy;                     /*  --> */
      DirSortDirection                sortDirection;              /*  --> */
      long                            dReserved;                  /*  --  */
      RStringPtr                      nameMatchString;            /*  --> name from which enumeration should start */
      RStringPtr *                    typesList;                  /*  --> list of entity types to be enumerated */
      unsigned long                   typeCount;                  /*  --> number of types in the list */
      DirEnumChoices                  enumFlags;                  /*  --> indicates what to enumerate */
      Boolean                         includeStartingPoint;       /*  --> if true return the record specified in starting point */
      Byte                            padByte;
      DirMatchWith                    matchNameHow;               /*  --> Matching Criteria for nameMatchString */
      DirMatchWith                    matchTypeHow;               /*  --> Matching Criteria for typeList */
      void *                          getBuffer;                  /*  --> */
      unsigned long                   getBufferSize;              /*  --> */
      SLRV                            responseSLRV;               /*  <--  response SLRV */
  };
  typedef struct DirEnumerateGetPB        DirEnumerateGetPB;
  /* The EnumerateRecords call-back function is defined as follows: */
  typedef CALLBACK_API( Boolean , ForEachDirEnumSpecProcPtr )(long clientData, const DirEnumSpec *enumSpec);
  typedef STACK_UPP_TYPE(ForEachDirEnumSpecProcPtr)               ForEachDirEnumSpecUPP;
  
  typedef ForEachDirEnumSpecUPP           ForEachDirEnumSpec;
  /*
  EnumerateParse:
  After an EnumerateGet call has completed, call EnumerateParse
  to parse through the buffer that was filled in EnumerateGet.
  
  'eachEnumSpec' will be called each time to return to the client a
  DirEnumSpec that matches the pattern for enumeration. 'enumFlag' indicates the type
  of information returned in the DirEnumSpec
  The clientData parameter that you pass in the parameter block will be passed
  to 'forEachEnumDSSpecFunc'.  You are free to put anything in clientData - it is intended
  to allow you some way to match the call-back to the original call (for
  example, you make more then one aysynchronous EnumerateGet calls and you want to
  associate returned results in some way).
  
  The client should return FALSE from 'eachEnumSpec' to continue
  processing of the EnumerateParse request.  Returning TRUE will
  terminate the EnumerateParse request.
  
  For synchronous calls, the call-back routine actually runs as part of the same thread
  of execution as the thread that made the EnumerateParse call.  That means that the
  same low-memory globals, A5, stack, etc. are in effect during the call-back
  that were in effect when the call was made.  Because of this, the call-back
  routine has the same restrictions as the caller of EnumerateParse:
  if EnumerateParse was not called from interrupt level, then the call-
  back routine can allocate memory. For asynchronous calls, call-back routine is
  like a ioCompletion except that A5 will be preserved for the application.
  */
  
  struct DirEnumerateParsePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      PackedRLIPtr                    aRLI;                       /*  --> an RLI specifying the cluster to be enumerated */
      long                            bReserved;                  /*  --  */
      long                            cReserved;                  /*  --  */
      ForEachDirEnumSpec              eachEnumSpec;               /*  --> */
      long                            eReserved;                  /*  --  */
      long                            fReserved;                  /*  --  */
      long                            gReserved;                  /*  --  */
      long                            hReserved;                  /*  --  */
      long                            iReserved;                  /*  --  */
      void *                          getBuffer;                  /*  --> */
      unsigned long                   getBufferSize;              /*  --> */
      short                           l1Reserved;                 /*  -- */
      short                           l2Reserved;                 /*  --  */
      short                           l3Reserved;                 /*  -- */
      short                           l4Reserved;                 /*  --  */
  
  };
  typedef struct DirEnumerateParsePB      DirEnumerateParsePB;
  /*
   * FindRecordGet operates similarly to DirEnumerate except it returns a list
   * of records instead of records local to a cluster.
  */
  
  struct DirFindRecordGetPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     startingPoint;
      long                            reservedA[2];
      RStringPtr                      nameMatchString;
      RStringPtr *                    typesList;
      unsigned long                   typeCount;
      long                            reservedB;
      short                           reservedC;
      DirMatchWith                    matchNameHow;
      DirMatchWith                    matchTypeHow;
      void *                          getBuffer;
      unsigned long                   getBufferSize;
      DirectoryNamePtr                directoryName;
      DirDiscriminator                discriminator;
  };
  typedef struct DirFindRecordGetPB       DirFindRecordGetPB;
  /* The FindRecordParse call-back function is defined as follows: */
  typedef CALLBACK_API( Boolean , ForEachRecordProcPtr )(long clientData, const DirEnumSpec *enumSpec, PackedRLIPtr pRLI);
  typedef STACK_UPP_TYPE(ForEachRecordProcPtr)                    ForEachRecordUPP;
  
  typedef ForEachRecordUPP                ForEachRecord;
  /*
   * This PB same as DirFindRecordGet except it includes the callback function
  */
  
  struct DirFindRecordParsePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     startingPoint;
      long                            reservedA[2];
      RStringPtr                      nameMatchString;
      RStringPtr *                    typesList;
      unsigned long                   typeCount;
      long                            reservedB;
      short                           reservedC;
      DirMatchWith                    matchNameHow;
      DirMatchWith                    matchTypeHow;
      void *                          getBuffer;
      unsigned long                   getBufferSize;
      DirectoryNamePtr                directoryName;
      DirDiscriminator                discriminator;
      ForEachRecord                   forEachRecordFunc;
  
  };
  typedef struct DirFindRecordParsePB     DirFindRecordParsePB;
  
  /*
  LookupGet:
  
  aRecordList is an array of pointers to RecordIDs, each of which must
  contain valid PackedRLI and a CreationID.  recordIDCount is
  the size of this array.
  
  attrTypeList is an array of pointers to AttributeTypes.  attrTypeCount is
  the size of this array.
  
  staringRecordIndex is the record from which to continue the lookup.
  If you want to start from first record in the list, this must be 1 (not zero).
  This value must always be <= recordIDCount.
  
  startingAttributeIndex is the AttributeType from which we want to continue the lookup.
  If you want to start from first attribute in the list, this must be 1 (not zero).
  This value must always be <= attrTypeCount.
  
  startingAttribute is the value of the attribute value from which we want to
  continue lookup. In case of catalogs supporting creationIDs, startingAttribute
  may contain only a CID. Other catalogs may require the entire value.
  If a non-null cid is given and if an attribute value with that cid is not found, this
  call will terminate with kOCENoSuchAttribute error. A client should not make a LookupParse call
  after getting this error.
  
  'includeStartingPoint' boolean can be set to 'true' to receive the value specified in the
  startingPoint in the results returned. If this is set to 'false', the value
  specified in the startingAttribute will not be returned.
  
  When LookupGet call fails with kOCEMoreData, the client will be able to find out where the call ended
  with a subsequent LookupParse call. When the LookupParse call completes with kOCEMoreData,
  lastRecordIndex, lastAttributeIndex and lastValueCID will point to the corresponding
  recordID, attributeType and the CreationID of the last value returned successfully. These parameters
  are exactly the same ones for the startingRecordIndex, startingAttributeIndex, and startingAttrValueCID
  so they can be used in a subsequent LookupGet call to continue the lookup.
  
  In an extreme case, It is possible that we had an attribute value that is too large to fit
  in the client's buffer. In such cases, if it was the only thing that we tried to fit
  into the buffer, the client will not able to proceed further because he will not know the
  attributeCID of the attribute to continue with.  Also he does not know how big a buffer
  would be needed for the next call to get this 'mondo' attribute value successfully.
  
  to support this, LookupParse call will do the following:
  
  If LookupGet has failed with kOCEMoreData error, LookupParse will check to make sure that
  ForEachAttributeValueFunc has been called at least once. If so, the client has the option
  to continue from that attribute CreationID (for PAB/ADAP) in the next LookupGet call.
  However, if it was not even called once, then the attribute value may be too big to fit in the
  user's buffer. In this case, lastAttrValueCID (lastAttribute) and attrSize are returned in the
  parse buffer and the call will fail with kOCEMoreAttrValue. However, it is possible that
  ForEachAttributeValue was not called because the user does not have read access to some of
  the attributeTypes in the list, and the buffer was full before even reading the creationID of
  any of the attribute values.  A kOCEMoreData error is returned.
  
  The Toolbox will check for duplicate RecordIDs in the aRecordList. If found, it will return
  'daDuplicateRecordIDErr'.
  
  The Toolbox will check for duplicate AttributeTypes in the attrTypeList. If found it will
  return 'daDuplicateAttrTypeErr'.
  */
  
  struct DirLookupGetPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr *                   aRecordList;                /*  --> an array of RecordID pointers */
      AttributeTypePtr *              attrTypeList;               /*  --> an array of attribute types */
      long                            cReserved;                  /*  --  */
      long                            dReserved;                  /*  --  */
      long                            eReserved;                  /*  --  */
      long                            fReserved;                  /*  --  */
      unsigned long                   recordIDCount;              /*  --> */
      unsigned long                   attrTypeCount;              /*  --> */
      Boolean                         includeStartingPoint;       /*  --> if true return the value specified by the starting indices */
      Byte                            padByte;
      short                           i1Reserved;                 /*  --  */
      void *                          getBuffer;                  /*  --> */
      unsigned long                   getBufferSize;              /*  --> */
      unsigned long                   startingRecordIndex;        /*  --> start from this record */
      unsigned long                   startingAttrTypeIndex;      /*  --> start from this attribute type */
      Attribute                       startingAttribute;          /*  --> start from this attribute value */
      long                            pReserved;                  /*  --  */
  };
  typedef struct DirLookupGetPB           DirLookupGetPB;
  /* The Lookup call-back functions are defined as follows: */
  typedef CALLBACK_API( Boolean , ForEachLookupRecordIDProcPtr )(long clientData, const RecordID *recordID);
  typedef STACK_UPP_TYPE(ForEachLookupRecordIDProcPtr)            ForEachLookupRecordIDUPP;
  
  typedef ForEachLookupRecordIDUPP        ForEachLookupRecordID;
  typedef CALLBACK_API( Boolean , ForEachAttrTypeLookupProcPtr )(long clientData, const AttributeType *attrType, AccessMask myAttrAccMask);
  typedef STACK_UPP_TYPE(ForEachAttrTypeLookupProcPtr)            ForEachAttrTypeLookupUPP;
  typedef ForEachAttrTypeLookupUPP        ForEachAttrTypeLookup;
  typedef CALLBACK_API( Boolean , ForEachAttrValueProcPtr )(long clientData, const Attribute *attribute);
  typedef STACK_UPP_TYPE(ForEachAttrValueProcPtr)                 ForEachAttrValueUPP;
  typedef ForEachAttrValueUPP             ForEachAttrValue;
  /*
  LookupParse:
  
  After a LookupGet call has completed, call LookupParse
  to parse through the buffer that was filled in LookupGet.  The
  toolbox will parse through the buffer and call the appropriate call-back routines
  for each item in the getBuffer.
  
  'eachRecordID' will be called each time to return to the client one of the
  RecordIDs from aRecordList.  The clientData parameter that you
  pass in the parameter block will be passed to eachRecordID.
  You are free to put anything in clientData - it is intended to allow
  you some way to match the call-back to the original call (in case, for
  example, you make simultaneous asynchronous LookupGet calls).  If you don't
  want to get a call-back for each RecordID (for example, if you're looking up
  attributes for only one RecordID), pass nil for eachRecordID.
  
  After forEachLocalRecordIDFunc is called, eachAttrType may be called to pass an
  attribute type (one from attrTypeList) that exists in the record specified
  in the last eachRecordID call.  If you don't want to get a call-back for
  each AttributeType (for example, if you're looking up only one attribute type,
  or you prefer to read the type from the Attribute struct during the eachAttrValue
  call-back routine), pass nil for eachAttrType. However access controls may
  prohibit you from reading some attribute types; in that case eachAttrValue
  may not be called even though the value exists. Hence the client should
  supply this call-back function to see the access controls for each attribute type.
  
  This will be followed by one or more calls to eachAttrValue, to pass the
  type, tag, and attribute value.  NOTE THIS CHANGE:  you are no longer expected to
  pass a pointer to a buffer in which to put the value.  Now you get a pointer to
  the value, and you can process it within the call-back routine.
  After one or more values are returned, eachAttrType may be called again to pass
  another attribute type that exists in the last-specified RecordID.
  
  The client should return FALSE from eachRecordID, eachAttrType, and
  eachAttrValue to continue processing of the LookupParse request.  Returning TRUE
  from any call-back will terminate the LookupParse request.
  
  If LookupGet has failed with kOCEMoreData error, LookupParse will check to make sure that
  ForEachAttributeValueFunc has been called at least once. If so, the client has the option
  to continue from that attribute CreationID (for PAB/ADAP) in the next LookupGet call.
  However, if it was not even called once, then the attribute value may be too big to fit in the
  user's buffer. In this case, lastAttrValueCID (lastAttribute) and attrSize are returned in the
  parse buffer and the call will fail with kOCEMoreAttrValue. However, it is possible that
  ForEachAttributeValue was not called because the user does not have read access to some of
  the attributeTypes in the list, and the buffer was full before even reading the creationID of
  any of the attribute values.  A kOCEMoreData error is returned.
  
  For synchronous calls, the call-back routine actually runs as part of the same thread
  of execution as the thread that made the LookupParse call.  That means that the
  same low-memory globals, A5, stack, etc. are in effect during the call-back
  that were in effect when the call was made.  Because of this, the call-back
  routine has the same restrictions as the caller of LookupParse:
  if LookupParse was not called from interrupt level, then the call-
  back routine can allocate memory. For asynchronous calls, call-back routine is
  like a ioCompletion except that A5 will be preserved for the application.
  */
  
  struct DirLookupParsePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr *                   aRecordList;                /*  --> must be same from the corresponding Get call */
      AttributeTypePtr *              attrTypeList;               /*  --> must be same from the corresponding Get call */
      long                            cReserved;                  /*  --  */
      ForEachLookupRecordID           eachRecordID;               /*  --> */
      ForEachAttrTypeLookup           eachAttrType;               /*  --> */
      ForEachAttrValue                eachAttrValue;              /*  --> */
      unsigned long                   recordIDCount;              /*  --> must be same from the corresponding Get call */
      unsigned long                   attrTypeCount;              /*  --> must be same from the corresponding Get call */
      long                            iReserved;                  /*  --  */
      void *                          getBuffer;                  /*  --> must be same from the corresponding Get call*/
      unsigned long                   getBufferSize;              /*  --> must be same from the corresponding Get call*/
      unsigned long                   lastRecordIndex;            /* <--  last RecordID processed when parse completed */
      unsigned long                   lastAttributeIndex;         /* <--  last Attribute Type processed when parse completed */
      Attribute                       lastAttribute;              /* <--  last attribute value (with this CreationID) processed when parse completed */
      unsigned long                   attrSize;                   /* <--  length of the attribute we did not return */
  };
  typedef struct DirLookupParsePB         DirLookupParsePB;
  
  /* AddAttributeValue */
  
  struct DirAddAttributeValuePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     aRecord;                    /*  --> */
      AttributePtr                    attr;                       /*  --> AttributeCreationID returned here */
  };
  typedef struct DirAddAttributeValuePB   DirAddAttributeValuePB;
  /*
  aRecord must contain valid PackedRLI and a CreationID.
  
  Instead of passing type, length, and value in three separate
  fields, we take a pointer to an Attribute structure that contains
  all three, and has room for the AttributeCreationNumber.
  The AttributeCreationID will be returned in the attr itself.
  
  The AttributeTag tells the catalog service that the attribute is an RString,
  binary, or a RecordID.
  */
  /*
  DeleteAttributeType:
  This call is provided so that an existing AttributeType can be deleted.
  If any attribute values exist for this type, they will all be deleted
  (if the user has access rights to delete the values) and then the attribute type
  will be deleted. Otherwise dsAccessDenied error will be returned.
  */
  
  struct DirDeleteAttributeTypePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     aRecord;                    /*  --> */
      AttributeTypePtr                attrType;                   /*  --> */
  };
  typedef struct DirDeleteAttributeTypePB DirDeleteAttributeTypePB;
  /*
      DeleteAttributeValue
  */
  
  struct DirDeleteAttributeValuePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     aRecord;                    /*  -> */
      AttributePtr                    attr;                       /*  -> */
  };
  typedef struct DirDeleteAttributeValuePB DirDeleteAttributeValuePB;
  
  /*
      ChangeAttributeValue:
      currentAttr ==> the attribute to be changed. For ADAS and PAB CreationID is
                      sufficient
      newAttr     ==> new value for the attribute. For ADAS and PAB 
                      CreationID field will be set when
                      the call succeesfully completes
      
      aRecord     ==> must contain valid PackedRecordLocationInfo and a CreationID.
  
      
  */
  
  struct DirChangeAttributeValuePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     aRecord;                    /*  -> */
      AttributePtr                    currentAttr;                /*  -> */
      AttributePtr                    newAttr;                    /*  -> */
  };
  typedef struct DirChangeAttributeValuePB DirChangeAttributeValuePB;
  
  /* VerifyAttributeValue */
  
  struct DirVerifyAttributeValuePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     aRecord;                    /*  --> */
      AttributePtr                    attr;                       /*  --> */
  };
  typedef struct DirVerifyAttributeValuePB DirVerifyAttributeValuePB;
  /*
  aRecord must contain valid PackedRLI and a CreationID.
  
  The attribute type and value are passed in the attribute structure.  If the
  attribute CreationID is non-zero, the server will verify that an attribute with
  the specified value and creation number exists in aRecord.  If the attribute
  CreationID is zero, the server will verify the attribute by type and value
  alone, and return the attribute CreationID in the Attribute struct if the
  attribute exists.
  */
  
  /*
  EnumerateAttributeTypesGet:
  The following two calls can be used to enumerate the attribute types present in
  a specified RecordID.  The first, EnumerateAttributeTypesGet, processes the request
  and reads the response into getBuffer, as much as will fit.  A kOCEMoreData error will
  be returned if the buffer was not large enough.  After this call completes, the
  client can call EnumerateAttributeTypesParse (see below).
  
  The user will able to continue from a startingPoint by setting a startingAttrType.
  Typically, this should be the last value returned in EnumerateAttributeTypesParse call
  when 'kOCEMoreData' is returned.
  
  If 'includeStartingPoint' is true when a 'startingAttrType' is specified, the starting value
  will be included in the results, if it exists. If this is set to false, this value will not
  be included. AttributeTypes following this type will be returned.
  */
  
  struct DirEnumerateAttributeTypesGetPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     aRecord;                    /*  --> */
      AttributeTypePtr                startingAttrType;           /*  --> starting point */
      long                            cReserved;                  /*  --  */
      long                            dReserved;                  /*  --  */
      long                            eReserved;                  /*  --  */
      long                            fReserved;                  /*  --  */
      long                            gReserved;                  /*  --  */
      long                            hReserved;                  /*  --  */
      Boolean                         includeStartingPoint;       /*  --> if true return the attrType specified by starting point */
      Byte                            padByte;
      short                           i1Reserved;                 /*  --  */
      void *                          getBuffer;                  /*  --> */
      unsigned long                   getBufferSize;              /*  --> */
  };
  typedef struct DirEnumerateAttributeTypesGetPB DirEnumerateAttributeTypesGetPB;
  /* The call-back function is defined as follows: */
  typedef CALLBACK_API( Boolean , ForEachAttrTypeProcPtr )(long clientData, const AttributeType *attrType);
  typedef STACK_UPP_TYPE(ForEachAttrTypeProcPtr)                  ForEachAttrTypeUPP;
  
  typedef ForEachAttrTypeUPP              ForEachAttrType;
  /*
  EnumerateAttributeTypesParse:
  After an EnumerateAttributeTypesGet call has completed, call EnumerateAttributeTypesParse
  to parse through the buffer that was filled in EnumerateAttributeTypesGet.  The
  toolbox will parse through the buffer and call the call-back routine for
  each attribute type in the getBuffer.
  
  The client should return false from eachAttrType to continue
  processing of the EnumerateAttributeTypesParse request.  Returning true will
  terminate the EnumerateAttributeTypesParse request.  The clientData parameter that
  you pass in the parameter block will be passed to eachAttrType.
  You are free to put anything in clientData - it is intended to allow
  you some way to match the call-back to the original call (in case, for
  example, you make simultaneous asynchronous calls).
  
  For synchronous calls, the call-back routine actually runs as part of the same thread
  of execution as the thread that made the EnumerateAttributeTypesParse call.  That means that the
  same low-memory globals, A5, stack, etc. are in effect during the call-back
  that were in effect when the call was made.  Because of this, the call-back
  routine has the same restrictions as the caller of EnumerateAttributeTypesParse.
  If EnumerateAttributeTypesParse was not called from interrupt level, then the call-
  back routine can allocate memory. For asynchronous calls, call-back routine is
  like a ioCompletion except that A5 will be preserved for the application.
  */
  
  struct DirEnumerateAttributeTypesParsePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     aRecord;                    /*  --> Same as DirEnumerateAttributeTypesGetPB */
      long                            bReserved;                  /*  --  */
      long                            cReserved;                  /*  --  */
      long                            dReserved;                  /*  --  */
      ForEachAttrType                 eachAttrType;               /*  --> */
      long                            fReserved;                  /*  --  */
      long                            gReserved;                  /*  --  */
      long                            hReserved;                  /*  --  */
      long                            iReserved;                  /*  --  */
      void *                          getBuffer;                  /*  --> */
      unsigned long                   getBufferSize;              /*  --> */
  };
  typedef struct DirEnumerateAttributeTypesParsePB DirEnumerateAttributeTypesParsePB;
  /*
  DirAbort:
  With this call a user will able to abort an outstanding catalog service call.
  A user must pass a pointer to the parameter block for the outstanding call.
  In the current version of the product, the toolbox will process this call
  for NetSearchADAPDirectoriesGet or FindADAPDirectoryByNetSearch calls and if possible
  it will abort. For other calls for ADAP and PAB this will return 'daAbortFailErr'.
  For CSAM catalogs, this call will be passed to the corresponding CSAM driver.
  The CSAM driver may process this call or may return 'daAbortFailErr'. This call can
  be called only in synchronous mode. Since the abort call makes references to fields in
  the pb associated with the original call, this pb must not be disposed or or altered if
  the original call completes before the abort call has completed.
  */
  
  struct DirAbortPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      DirParamBlock *                 pb;                         /*  --> pb for the call which must be aborted */
  };
  typedef struct DirAbortPB               DirAbortPB;
  
  /*
  AddPseudonym:
  An alternate name and type can be added to a given record. If allowDuplicate
  is set the name and type will be added even if the same name and type already
  exists.
  */
  
  struct DirAddPseudonymPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     aRecord;                    /*  --> RecordID to which pseudonym is to be added */
      RStringPtr                      pseudonymName;              /*  --> new name to be added as pseudonym */
      RStringPtr                      pseudonymType;              /*  --> new name to be added as pseudonym */
      Boolean                         allowDuplicate;             /*  --> */
      Boolean                         filler1;
  };
  typedef struct DirAddPseudonymPB        DirAddPseudonymPB;
  /*
  DeletePseudonym:
  An alternate name and type for a given record can be deleted.
  */
  
  struct DirDeletePseudonymPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     aRecord;                    /*  --> RecordID to which pseudonym to be added */
      RStringPtr                      pseudonymName;              /*  --> pseudonymName to be deleted */
      RStringPtr                      pseudonymType;              /*  --> pseudonymType to be deleted */
  };
  typedef struct DirDeletePseudonymPB     DirDeletePseudonymPB;
  
  /*
      AddAlias:
      This call can be used to create an alias  record. The alias
      can be created either in the same or different cluster. ADAS will not support
      this call for this release. A new catalog capability flag 'kSupportsAlias' will indicate
      if the catalog supports this call. PAB's will support this call. For the PAB implementation,
      this call will create a record with the name and type specified an aRecord.
      This call works exactly like AddRecord.
      If 'allowDuplicate' is false and another record with same name and type already exists
      'daNoDupAllowed' error will be returned.
  */
  
  struct DirAddAliasPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     aRecord;                    /*  -> */
      Boolean                         allowDuplicate;             /*  -> */
      Boolean                         filler1;
  };
  typedef struct DirAddAliasPB            DirAddAliasPB;
  /*
  DirFindValue:
  This call can be used to find the occurrence of a value. The value
  to be matched is passed in the buffer 'matchingData' field. The current
  ADAP/PAB implementation will match a maximum of 32 bytes of data.
  For attribute values in the PAB/ADAP implementation, only the first 32 bytes will
  be used for comparing the occurrence of data. Search can be restricted to
  a particular record and/or attribute type by specifying 'aRecord' or 'aType'.
  After finding one occurrence, 'startingRecord' and 'startingAttribute'
  can be specified to find the next occurrence of the same value.
  'sortDirection' can be specified with starting values to search forward or backward.
  When a matching value is found, the 'recordFound' indicates the reccordID in which the
  data occurrence was found, 'attributeFound' indicates the attribute with in which the
  matching data was found. ADAP/PAB implementation returns only the type and creationID of
  attributes. Catalogs which don't support creationIDs may return the
  complete value; hence this call may need a buffer to hold the data. For ADAP/PAB implementations
  the user has to make a DirLookup call to get the actual data. 'recordFound' and
  'attributeFound' can be used to initialize 'startingRecord' and 'startingAttribute' to
  find the next occurrence of the value.
  */
  
  struct DirFindValuePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      PackedRLIPtr                    aRLI;                       /*  --> an RLI specifying the cluster to be enumerated */
      LocalRecordIDPtr                aRecord;                    /*  --> if not nil, look only in this record */
      AttributeTypePtr                attrType;                   /*  --> if not nil, look only in this attribute type */
      LocalRecordIDPtr                startingRecord;             /*  --> record in which to start searching */
      AttributePtr                    startingAttribute;          /*  --> attribute in which to start searching */
      LocalRecordIDPtr                recordFound;                /* <--  record in which data was found */
      Attribute                       attributeFound;             /* <--  attribute in which data was found */
      unsigned long                   matchSize;                  /*  --> length of matching bytes */
      void *                          matchingData;               /*  --> data bytes to be matched in search */
      DirSortDirection                sortDirection;              /*  --> sort direction (forwards or backwards) */
  };
  typedef struct DirFindValuePB           DirFindValuePB;
  
  /*
  EnumeratePseudonymGet:
  This call can be used to enumerate the existing pseudonyms for
  a given record specified in 'aRecord'. A starting point can be specified
  by 'startingName' and 'startingType'. If the 'includeStartingPoint' boolean
  is true and a starting point is specified, the name specified by startingName
  and startingType also is returned in the results, if it exists. If this is set to false,
  the pseudonym in startingName and Type is not included.
  Pseudonyms returned in the 'getBuffer' can be extracted by making an
  EnumeratePseudonymParse call. The results will consist of a RecordID with the
  name and type of the pseudonym. If the buffer could not hold all the results, then
  'kOCEMoreData' error will be returned. The user will be able to continue the call by
  using the last result returned as starting point for the next call.
  */
  
  struct DirEnumeratePseudonymGetPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     aRecord;                    /*  --> */
      RStringPtr                      startingName;               /*  --> */
      RStringPtr                      startingType;               /*  --> */
      long                            dReserved;                  /*  --  */
      long                            eReserved;                  /*  --  */
      long                            fReserved;                  /*  --  */
      long                            gReserved;                  /*  --  */
      long                            hReserved;                  /*  --  */
      Boolean                         includeStartingPoint;       /*  --> if true return the Pseudonym specified by starting point will be included */
      Byte                            padByte;
      short                           i1Reserved;                 /*  --  */
      void *                          getBuffer;                  /*  --> */
      unsigned long                   getBufferSize;              /*  --> */
  };
  typedef struct DirEnumeratePseudonymGetPB DirEnumeratePseudonymGetPB;
  /* The call-back function is defined as follows: */
  typedef CALLBACK_API( Boolean , ForEachRecordIDProcPtr )(long clientData, const RecordID *recordID);
  typedef STACK_UPP_TYPE(ForEachRecordIDProcPtr)                  ForEachRecordIDUPP;
  
  typedef ForEachRecordIDUPP              ForEachRecordID;
  /*
  EnumeratePseudonymParse:
  The pseudonyms returned in the 'getBuffer' from the EnumeratePseudonymGet call
  can be extracted by using the EnumeratePseudonymParse call. 'eachRecordID'
  will be called for each pseudonym.
  
  Returning true from any call-back will terminate the EnumeratePseudonymParse call.
  
  For synchronous calls, the call-back routine actually runs as part of the same thread
  of execution as the thread that made the EnumeratePseudonymParse call.  That means that the
  same low-memory globals, A5, stack, etc. are in effect during the call-back
  that were in effect when the call was made.  Because of this, the call-back
  routine has the same restrictions as the caller of EnumeratePseudonymParse:
  if EnumeratePseudonymParse was not called from interrupt level, then the call-
  back routine can allocate memory. For asynchronous calls, call-back routine is
  like a ioCompletion except that A5 will be preserved for the application.
  */
  
  struct DirEnumeratePseudonymParsePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     aRecord;                    /*  --> same as DirEnumerateAliasesGetPB */
      long                            bReserved;                  /*  --  */
      long                            cReserved;                  /*  --  */
      ForEachRecordID                 eachRecordID;               /*  --> */
      long                            eReserved;                  /*  --  */
      long                            fReserved;                  /*  --  */
      long                            gReserved;                  /*  --  */
      long                            hReserved;                  /*  --  */
      long                            iReserved;                  /*  --  */
      void *                          getBuffer;                  /*  --> */
      unsigned long                   getBufferSize;              /*  --> */
  };
  typedef struct DirEnumeratePseudonymParsePB DirEnumeratePseudonymParsePB;
  
  /* GetNameAndType */
  
  struct DirGetNameAndTypePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     aRecord;                    /*  --> */
  };
  typedef struct DirGetNameAndTypePB      DirGetNameAndTypePB;
  /*
  aRecord must contain valid RLI and a CreationID.  It
  must also contain pointers to maximum-length RStrings (name and type fields)
  in which will be returned the record's distinguished name and type.
  */
  
  /*
  SetNameAndType:
  This call can be used to change a name and type for a record. The record
  to be renamed is specified using 'aRecord'.
  'newName' and 'newType' indicate the name and type to be set.
  'allowDuplicate' if true indicates that name is to be set even if another
  name and type exactly matches the newName and newType specified.
  
  'newName' and 'newType' are required since the catalogs not supporting
  CreationID require name and type fields in the recordID to identify a given
  record.
  */
  
  struct DirSetNameAndTypePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     aRecord;                    /*  --> */
      Boolean                         allowDuplicate;             /*  --> */
      Byte                            padByte;
      RStringPtr                      newName;                    /*  --> new name for the record */
      RStringPtr                      newType;                    /*  --> new type for the record */
  };
  typedef struct DirSetNameAndTypePB      DirSetNameAndTypePB;
  
  /*
  DirGetMetaRecordInfo: This call can be made to obtain
  the MetaRecordInfo for a given record. Information returned
  is 16 bytes of OPAQUE information about the record.
  */
  
  struct DirGetRecordMetaInfoPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     aRecord;                    /*  --> */
      DirMetaInfo                     metaInfo;                   /* <--  */
  };
  typedef struct DirGetRecordMetaInfoPB   DirGetRecordMetaInfoPB;
  
  /*
  DirGetDNodeMetaInfo: This call can be made to obtain
  the DNodeMetaInfo for a given Packed RLI. Information returned
  is 16 bytes of OPAQUE information about the DNode.
  */
  
  struct DirGetDNodeMetaInfoPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      PackedRLIPtr                    pRLI;                       /*  --> */
      DirMetaInfo                     metaInfo;                   /* <--  */
  };
  typedef struct DirGetDNodeMetaInfoPB    DirGetDNodeMetaInfoPB;
  
  /*
  EnumerateDirectoriesGet:
  A user can enumerate all the catalogs installed. This includes installed
  ADAP and CSAM catalogs. The user can specify a signature as input to restrict
  the results. kDirADAPKind will return only ADAP catalogs, kDirDSAMKind
  will return all CSAM catalogs. kDirAllKinds will get both ADAP & CSAM catalogs.
  A specific signature (e.g. X.500) may be used to get catalogs with an X.500 signature.
  The information for each catalog returned will have directoryName, discriminator and features.
  
  If the user receives 'noErr' or 'kOCEMoreData', the buffer will contain valid results. A user
  can extract the results in the 'getBuffer' by making an DirEnumerateDirectories call.
  
  If 'kOCEMoreData' is received, the user can continue enumeration by using the last catalog and
  discriminator as startingDirectoryName and staringDirDiscriminator in the next call.
  
  If 'includeStartingPoint' is true and a starting point is specified,
  the staring point will be returned in the result. If false, it is not included.
  */
  
  struct DirEnumerateDirectoriesGetPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      OCEDirectoryKind                directoryKind;              /*  --> enumerate catalogs bearing this signature */
      DirectoryNamePtr                startingDirectoryName;      /*  --> staring catalog name */
      DirDiscriminator                startingDirDiscriminator;   /*  --> staring catalog discriminator */
      long                            eReserved;                  /*  --  */
      long                            fReserved;                  /*  --  */
      long                            gReserved;                  /*  --  */
      long                            hReserved;                  /*  --  */
      Boolean                         includeStartingPoint;       /*  --> if true return the catalog specified by starting point */
      Byte                            padByte;
      short                           i1Reserved;                 /*  --  */
      void *                          getBuffer;                  /*  --> */
      unsigned long                   getBufferSize;              /*  --> */
  };
  typedef struct DirEnumerateDirectoriesGetPB DirEnumerateDirectoriesGetPB;
  
  typedef CALLBACK_API( Boolean , ForEachDirectoryProcPtr )(long clientData, const DirectoryName *dirName, const DirDiscriminator *discriminator, DirGestalt features);
  typedef STACK_UPP_TYPE(ForEachDirectoryProcPtr)                 ForEachDirectoryUPP;
  
  typedef ForEachDirectoryUPP             ForEachDirectory;
  /*
  EnumerateDirectoriesParse:
  The catalog info returned in 'getBuffer' from the EnumerateDirectoriesGet call
  can be extracted using the EnumerateDirectoriesParse call. 'eachDirectory' will
  be called for each catalog.
  
  Returning true from any call-back will terminate the EnumerateDirectoriesParse call.
  
  For synchronous calls, the call-back routine actually runs as part of the same thread
  of execution as the thread that made the EnumerateDirectoriesParse call.  That means that the
  same low-memory globals, A5, stack, etc. are in effect during the call-back
  that were in effect when the call was made.  Because of this, the call-back
  routine has the same restrictions as the caller of EnumerateDirectoriesParse:
  if EnumerateDirectoriesParse was not called from interrupt level, then the call-
  back routine can allocate memory. For asynchronous calls, call-back routine is
  like a ioCompletion except that A5 will be preserved for the application.
  
  eachDirectory will be called each time to return to the client a
  DirectoryName, DirDiscriminator, and features for that catalog.
  */
  
  struct DirEnumerateDirectoriesParsePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      long                            aReserved;                  /*  --  */
      long                            bReserved;                  /*  --  */
      long                            cReserved;                  /*  --  */
      long                            dReserved;                  /*  --  */
      ForEachDirectory                eachDirectory;              /*  --> */
      long                            fReserved;                  /*  --  */
      long                            gReserved;                  /*  --  */
      long                            hReserved;                  /*  --  */
      long                            iReserved;                  /*  --  */
      void *                          getBuffer;                  /*  --> */
      unsigned long                   getBufferSize;              /*  --> */
  };
  typedef struct DirEnumerateDirectoriesParsePB DirEnumerateDirectoriesParsePB;
  
  /*
  The Following five call are specific to ADAP Catalogs. Toolbox
  remembers a list of catalogs across boots. If any catalog service
  call is intended for a ADAP catalog, then it must be in the list.
  In order for managing this list, A client (Probably DE will use these
  calls.
  DirAddADAPDirectoryPB: Add a new ADAP catalog to the list.
  DirRemoveADAPDirectory: Remove a ADAP catalog from the list.
  DirNetSearchADAPDirectoriesGet:   search an internet for adas catalogs.
  DirNetSearchADAPDirectoriesParse: extract the results obtained NetSearchADAPDirectoriesGet.
  DirFindADAPDirectoryByNetSearch: Find a specified catalog through net search.
  */
  /*
  NetSearchADAPDirectoriesGet:
  This call can be used to make a network wide search for finding ADAP catalogs.
  This call will be supported only by 'ADAP' and involve highly expensive
  network operations, so the user is advised to use utmost discretion before
  making this call. The results will be collected in the 'getbuffer' and can be
  extracted using NetSearchADAPDirectoriesParse call. The directoryName,
  the directoryDiscriminator, features and serverHint (AppleTalk address for
  a PathFinder serving that catalog) are collected for each catalog found
  on the network. If buffer is too small to hold all the catalogs found on
  the network, a 'kOCEMoreData' error will be returned.
  */
  
  struct DirNetSearchADAPDirectoriesGetPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      void *                          getBuffer;                  /*  --> */
      unsigned long                   getBufferSize;              /*  --> */
      long                            cReserved;                  /*  --  */
  };
  typedef struct DirNetSearchADAPDirectoriesGetPB DirNetSearchADAPDirectoriesGetPB;
  typedef CALLBACK_API( Boolean , ForEachADAPDirectoryProcPtr )(long clientData, const DirectoryName *dirName, const DirDiscriminator *discriminator, DirGestalt features, AddrBlock serverHint);
  typedef STACK_UPP_TYPE(ForEachADAPDirectoryProcPtr)             ForEachADAPDirectoryUPP;
  
  typedef ForEachADAPDirectoryUPP         ForEachADAPDirectory;
  /*
  DirNetSearchADAPDirectoriesParse:
  This call can be used to extract the results obtained in the 'getBuffer'.
  The directoryName, directoryDiscriminator, features and
  serverHint (AppleTalk address for a PathFinder serving that catalog) are
  returned in each call-back. These values may be used to make an
  AddADAPDirectory call.
  
  Returning TRUE from any call-back will terminate the NetSearchADAPDirectoriesParse request.
  
  For synchronous calls, the call-back routine actually runs as part of the same thread
  of execution as the thread that made the DirNetSearchADAPDirectoriesParse call. That means that the
  same low-memory globals, A5, stack, etc. are in effect during the call-back
  that were in effect when the call was made.  Because of this, the call-back
  routine has the same restrictions as the caller of DirNetSearchADAPDirectoriesParse:
  if DirNetSearchADAPDirectoriesParse was not called from interrupt level, then the call-
  back routine can allocate memory. For asynchronous calls, call-back routine is
  like a ioCompletion except that A5 will be preserved for the application.
  */
  
  struct DirNetSearchADAPDirectoriesParsePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      void *                          getBuffer;                  /*  --> */
      unsigned long                   getBufferSize;              /*  --> */
      ForEachADAPDirectory            eachADAPDirectory;          /*  --> */
  };
  typedef struct DirNetSearchADAPDirectoriesParsePB DirNetSearchADAPDirectoriesParsePB;
  /*
  DirFindADAPDirectoryByNetSearch:
  This call can be used to make a network wide search to find an ADAP catalog.
  This call will be supported only by 'ADAP' and involves highly expensive
  network operations, so the user is advised to use utmost discretion before
  making this call. The catalog is specified using directoryName and discriminator.
  If 'addToOCESetup' is true, the catalog will be automatically added to the setup
  list and will be visible through the EnumerateDirectories call and also
  also a creationID to the directoryRecord will be returned.
  If this parameter is set to 'false', the catalog will be added to temporary list
  and will be available for making other catalog service calls. The catalogs
  which are not in the preference catalog list will not be visible through the
  EnumerateDirectories call.
  */
  
  struct DirFindADAPDirectoryByNetSearchPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      DirectoryNamePtr                directoryName;              /*  --> catalog name */
      DirDiscriminator                discriminator;              /*  --> discriminate between dup catalog names */
      Boolean                         addToOCESetup;              /*  --> add this catalog to OCE Setup List */
      Byte                            padByte;
      CreationID                      directoryRecordCID;         /* <--  creationID for the catalog record */
  };
  typedef struct DirFindADAPDirectoryByNetSearchPB DirFindADAPDirectoryByNetSearchPB;
  
  /*
  DirAddADAPDirectory:
  The catalog specified by 'directoryName' and 'discriminator' will be
  added to the list of catalogs maintained by the Toolbox. Once added,
  the catalog is available across boots, until the catalog is removed
  explicitly through a DirRemoveADAPDirectory call.
  If 'serverHint' is not nil, the address provided will be used
  to contact a PathFinder for the catalog specified.
  If 'serverHint' is nil or does not point to a valid PathFinder server
  for that catalog, this call will fail.
  If 'addToOCESetup' is true, the catalog will be automatically added to the setup
  catalog list and will be visible through EnumerateDirectories calls and
  also a creationID to the directoryRecord will be returned.
  If this parameter is set to 'false', catalog will be added to temprary list
  and will be available for making other catalog service calls. The catalogs
  which are not in the setup  list will not be visible through
  EnumerateDirectories call.
  */
  
  struct DirAddADAPDirectoryPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      DirectoryNamePtr                directoryName;              /*  --> catalog name */
      DirDiscriminator                discriminator;              /*  --> discriminate between dup catalog names */
      Boolean                         addToOCESetup;              /*  --> add this catalog to OCE Setup */
      Byte                            padByte;
      CreationID                      directoryRecordCID;         /* <--  creationID for the catalog record */
  };
  typedef struct DirAddADAPDirectoryPB    DirAddADAPDirectoryPB;
  
  /*
  GetDirectoryInfo:
  DirGetDirectoryInfo will do:
  
  If a 'dsRefNum' is non-Zero, the catalog information for
      the corresponding  PAB will be  returned.
   If 'dsRefNum' is zero and 'serverHint' is non-zero, If the
   'serverHint' points to a valid ADAP Catalog Server(Path Finder),
   the catalog information (i.e. directoryName, discriminator, features)
   for that catalog will be returned.
      If a  valid catalog name and discriminator are provided
      features (Set of capability flags) for that catalog will be returned.
  */
  
  struct DirGetDirectoryInfoPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      DirectoryNamePtr                directoryName;              /*  --> catalog name */
      DirDiscriminator                discriminator;              /* <--> descriminate between dup catalog names */
      DirGestalt                      features;                   /* <--  capability bit flags */
  };
  typedef struct DirGetDirectoryInfoPB    DirGetDirectoryInfoPB;
  
  /*
   * Note on Access Controls:
   * Access control is based on a list model.
   * You can get access controls list which gives dsObject and accMask for each dsObject.
   * GetAccessControl can be limited to currently supplied identity by setting forCurrentUserOnly.
   * There are special DSObjects are defined in ADASTypes.h for each of the category
   * supported in ADAS Catalogs. (kOwner, kFriends, kAuthenticatedToCluster, 
   * kAuthenticatedToDirectory, kGuest) and DUGetActlDSSpec call can be used
   * to obtain appropraiate DSSpec before making set calls to ADAS catalogs.
   *
   */
  
  /*
      GetDNodeAccessControlGet:
      This call can be done to get back access control list for a DNode.
      pRLI -> RLI of the DNode whose access control list is sought
      curUserAccMask -> If this is 'true', Access controls for the user specified by
                        the identity parameter will be returned other wise entire list
                        will be returned.
      startingDsObj  -> If this is not nil, list should be started after this object.
      startingPointInclusive -> If staringDsObj is specified, include that in the returned
                                results.
                                
      The results will be collected in the 'getBuffer' supplied by the user.
      If buffer can not hold all the data returned 'daMoreData' error will be returned.
       
      If user receives 'noErr' or 'daMoreData', buffer will contain valid results. A user
      can extract the results in the 'getBuffer' by making 'DsGetDNodeAccessControlParse' call.
      
      Results returned for each DSObject will contain DSSpecPtr and three sets of access mask. 
  
  */
  
  struct DirGetDNodeAccessControlGetPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      PackedRLIPtr                    pRLI;                       /*  -> RLI of the cluster whose access control list is sought  */
      long                            bReserved;                  /*  -- unused */
      long                            cReserved;                  /*  -- unused */
      long                            dReserved;                  /*  -- unused */
      long                            eResreved;                  /* --> */
      Boolean                         forCurrentUserOnly;         /* -->  */
      Boolean                         filler1;
      DSSpec *                        startingPoint;              /* --> starting Point */
      Boolean                         includeStartingPoint;       /* --> if true return the DsObject specified in starting point */
      Boolean                         filler2;
      void *                          getBuffer;                  /*    -> */
      unsigned long                   getBufferSize;              /*  -> */
  
  };
  typedef struct DirGetDNodeAccessControlGetPB DirGetDNodeAccessControlGetPB;
  /* The Access Control call-back function is defined as follows: */
  typedef CALLBACK_API( Boolean , ForEachDNodeAccessControlProcPtr )(long clientData, const DSSpec *dsObj, AccessMask activeDnodeAccMask, AccessMask defaultRecordAccMask, AccessMask defaultAttributeAccMask);
  typedef STACK_UPP_TYPE(ForEachDNodeAccessControlProcPtr)        ForEachDNodeAccessControlUPP;
  
  typedef ForEachDNodeAccessControlUPP    ForEachDNodeAccessControl;
  /*
      GetDNodeAccessControlParse:
      After an GetDNodeAccessControlGet call has completed, 
      call GetDNodeAccessControlParse to parse through the buffer that
      that was filled in GetDNodeAccessControlGet.
      
      'eachObject' will be called each time to return to the client a
      DsObject and a set of three accMasks (three long words) for that object.
      Acceesmasks returned apply to the dsObject in the callback :
      1. Currently Active Access mask for the specified DNode.
      2. Default Access mask for any Record in the DNode
      3. Default Access mask for any Attribute in the DNode
      The clientData parameter that you pass in the parameter block will be passed
      to 'eachObject'.  You are free to put anything in clientData - it is intended
      to allow you some way to match the call-back to the original call (for
      example, you make more then one aysynchronous GetDNodeAccessControlGet calls and you want to
      associate returned results in some way).
      
      The client should return FALSE from 'eachObject' to continue
      processing of the GetDNodeAccessControlParse request.  Returning TRUE will
      terminate the GetDNodeAccessControlParse request.
  
      For synchronous calls, the call-back routine actually runs as part of the same thread 
      of execution as the thread that made the GetDNodeAccessControlParse call.  That means that the
      same low-memory globals, A5, stack, etc. are in effect during the call-back
      that were in effect when the call was made.  Because of this, the call-back
      routine has the same restrictions as the caller of GetDNodeAccessControlParse:
      if GetDNodeAccessControlParse was not called from interrupt level, then the call-
      back routine can allocate memory. For asynchronous calls, call-back routine is
      like a ioCompletion except that A5 will be preserved for the application.
  
  */
  
  struct DirGetDNodeAccessControlParsePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      PackedRLIPtr                    pRLI;                       /*  -> RLI of the cluster  */
      long                            bReserved;                  /*  -- unused */
      long                            cReserved;                  /*  -- unused */
      long                            dReserved;                  /*  -- unused */
      ForEachDNodeAccessControl       eachObject;                 /* --> */
      Boolean                         forCurrentUserOnly;         /* -->  */
      Boolean                         filler1;
      DSSpec *                        startingPoint;              /* --> starting Point */
      Boolean                         includeStartingPoint;       /* --> if true return the record specified in starting point */
      Boolean                         filler2;
      void *                          getBuffer;                  /*    -> */
      unsigned long                   getBufferSize;              /*  -> */
  
  };
  typedef struct DirGetDNodeAccessControlParsePB DirGetDNodeAccessControlParsePB;
  /*
      GetRecordAccessControlGet:
      This call can be done to get back access control list for a RecordID.
      aRecord -> RecordID to which access control list is sought
      curUserAccMask -> If this is 'true', Access controls for the user specified by
                        the identity parameter will be returned other wise entire list
                        will be returned.
      startingDsObj  -> If this is not nil, list should be started after this object.
      startingPointInclusive -> If staringDsObj is specified, include that in the returned
                                results.
                                
      The results will be collected in the 'getBuffer' supplied by the user.
      If buffer can not hold all the data returned 'daMoreData' error will be returned.
       
      If user receives 'noErr' or 'daMoreData', buffer will contain valid results. A user
      can extract the results in the 'getBuffer' by making 'DsGetDNodeAccessControlParse' call.
      
      Results returned for each DSObject will contain DSSpecPtr and accMask. 
  
  */
  
  struct DirGetRecordAccessControlGetPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     aRecord;                    /*  -> RecordID to which access control list is sought list is sought  */
      long                            bReserved;                  /*  -- unused */
      long                            cReserved;                  /*  -- unused */
      long                            dReserved;                  /*  -- unused */
      long                            eResreved;                  /* --> */
      Boolean                         forCurrentUserOnly;         /* -->  */
      Boolean                         filler1;
      DSSpec *                        startingPoint;              /* --> starting Point */
      Boolean                         includeStartingPoint;       /* --> if true return the record specified in starting point */
      Boolean                         filler2;
      void *                          getBuffer;                  /*    -> */
      unsigned long                   getBufferSize;              /*  -> */
  
  };
  typedef struct DirGetRecordAccessControlGetPB DirGetRecordAccessControlGetPB;
  /* The Access Control call-back function is defined as follows: */
  typedef CALLBACK_API( Boolean , ForEachRecordAccessControlProcPtr )(long clientData, const DSSpec *dsObj, AccessMask activeDnodeAccMask, AccessMask activeRecordAccMask, AccessMask defaultAttributeAccMask);
  typedef STACK_UPP_TYPE(ForEachRecordAccessControlProcPtr)       ForEachRecordAccessControlUPP;
  
  typedef ForEachRecordAccessControlUPP   ForEachRecordAccessControl;
  /*
      GetRecordAccessControlParse:
      After an GetRecordAccessControlGet call has completed, 
      call GetRecordAccessControlParse to parse through the buffer that
      that was filled in GetRecordAccessControlGet.
      
      'eachObject' will be called each time to return to the client a
      DsObject and a set of three accMasks (three long words) for that object.
      Acceesmasks returned apply to the dsObject in the callback :
      1. Active Access mask for the DNode Containing the Record.
      2. Active Access mask for the Record specified.
      3. Defualt Access mask for Attributes in the record.
      The clientData parameter that you pass in the parameter block will be passed
      to 'eachObject'.  You are free to put anything in clientData - it is intended
      to allow you some way to match the call-back to the original call (for
      example, you make more then one aysynchronous GetRecordAccessControlGet calls and you want to
      associate returned results in some way).
      
      The client should return FALSE from 'eachObject' to continue
      processing of the GetRecordAccessControlParse request.  Returning TRUE will
      terminate the GetRecordAccessControlParse request.
  
      For synchronous calls, the call-back routine actually runs as part of the same thread 
      of execution as the thread that made the GetRecordAccessControlParse call.  That means that the
      same low-memory globals, A5, stack, etc. are in effect during the call-back
      that were in effect when the call was made.  Because of this, the call-back
      routine has the same restrictions as the caller of GetRecordAccessControlParse:
      if GetRecordAccessControlParse was not called from interrupt level, then the call-
      back routine can allocate memory. For asynchronous calls, call-back routine is
      like a ioCompletion except that A5 will be preserved for the application.
  
  */
  
  struct DirGetRecordAccessControlParsePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     aRecord;                    /*  -> RecordID to which access control list is sought list is sought  */
      long                            bReserved;                  /*  -- unused */
      long                            cReserved;                  /*  -- unused */
      long                            dReserved;                  /*  -- unused */
      ForEachRecordAccessControl      eachObject;                 /* --> */
      Boolean                         forCurrentUserOnly;         /* -->  */
      Boolean                         filler1;
      DSSpec *                        startingPoint;              /* --> starting Point */
      Boolean                         includeStartingPoint;       /* --> if true return the record specified in starting point */
      Boolean                         filler2;
      void *                          getBuffer;                  /*    -> */
      unsigned long                   getBufferSize;              /*  -> */
  
  };
  typedef struct DirGetRecordAccessControlParsePB DirGetRecordAccessControlParsePB;
  /*
      GetAttributeAccessControlGet:
      This call can be done to get back access control list for a attributeType with in a RecordID.
      aRecord -> RecordID to which access control list is sought
      aType   -> Attribute Type to which access controls are sought
      curUserAccMask -> If this is 'true', Access controls for the user specified by
                        the identity parameter will be returned other wise entire list
                        will be returned.
      startingDsObj  -> If this is not nil, list should be started after this object.
      startingPointInclusive -> If staringDsObj is specified, include that in the returned
                                results.
                                
      The results will be collected in the 'getBuffer' supplied by the user.
      If buffer can not hold all the data returned 'daMoreData' error will be returned.
       
      If user receives 'noErr' or 'daMoreData', buffer will contain valid results. A user
      can extract the results in the 'getBuffer' by making 'DsGetDNodeAccessControlParse' call.
      
      Results returned for each DSObject will contain DSSpecPtr and accMask. 
  
  */
  
  struct DirGetAttributeAccessControlGetPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     aRecord;                    /*  -> RecordID to which access control list is sought list is sought  */
      AttributeTypePtr                aType;                      /*  -> Attribute Type to which access controls are sought          */
      long                            cReserved;                  /*  -- unused */
      long                            dReserved;                  /*  -- unused */
      long                            eResreved;                  /* --> */
      Boolean                         forCurrentUserOnly;         /* -->  */
      Boolean                         filler1;
      DSSpec *                        startingPoint;              /* --> starting Point */
      Boolean                         includeStartingPoint;       /* --> if true return the record specified in starting point */
      Boolean                         filler2;
      void *                          getBuffer;                  /*    -> */
      unsigned long                   getBufferSize;              /*  -> */
  
  };
  typedef struct DirGetAttributeAccessControlGetPB DirGetAttributeAccessControlGetPB;
  /* The Access Control call-back function is defined as follows: */
  typedef CALLBACK_API( Boolean , ForEachAttributeAccessControlProcPtr )(long clientData, const DSSpec *dsObj, AccessMask activeDnodeAccMask, AccessMask activeRecordAccMask, AccessMask activeAttributeAccMask);
  typedef STACK_UPP_TYPE(ForEachAttributeAccessControlProcPtr)    ForEachAttributeAccessControlUPP;
  
  typedef ForEachAttributeAccessControlUPP  ForEachAttributeAccessControl;
  /*
      GetAttributeAccessControlParse:
      After an GetAttributeAccessControlGet call has completed, 
      call GetAttributeAccessControlParse to parse through the buffer that
      that was filled in GetAttributeAccessControlGet.
      
      'eachObject' will be called each time to return to the client a
      DsObject and a set of three accMasks (three long words) for that object.
      Acceesmasks returned apply to the dsObject in the callback :
      1. Active Access mask for the DNode Containing the Attribute.
      2. Active Access mask for the Record in the Containing the Attribute.
      3. Active Access mask for the specified Attribute.
      The clientData parameter that you pass in the parameter block will be passed
      to 'eachObject'.  You are free to put anything in clientData - it is intended
      to allow you some way to match the call-back to the original call (for
      example, you make more then one aysynchronous GetAttributeAccessControlGet calls and you want to
      associate returned results in some way).
      
      The client should return FALSE from 'eachObject' to continue
      processing of the GetAttributeAccessControlParse request.  Returning TRUE will
      terminate the GetAttributeAccessControlParse request.
  
      For synchronous calls, the call-back routine actually runs as part of the same thread 
      of execution as the thread that made the GetAttributeAccessControlParse call.  That means that the
      same low-memory globals, A5, stack, etc. are in effect during the call-back
      that were in effect when the call was made.  Because of this, the call-back
      routine has the same restrictions as the caller of GetAttributeAccessControlParse:
      if GetAttributeAccessControlParse was not called from interrupt level, then the call-
      back routine can allocate memory. For asynchronous calls, call-back routine is
      like a ioCompletion except that A5 will be preserved for the application.
  
  */
  
  struct DirGetAttributeAccessControlParsePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RecordIDPtr                     aRecord;                    /*  -> RecordID to which access control list is sought list is sought  */
      AttributeTypePtr                aType;                      /*  -> Attribute Type to which access controls are sought          */
      long                            cReserved;                  /*  -- unused */
      long                            dReserved;                  /*  -- unused */
      ForEachAttributeAccessControl   eachObject;                 /* --> */
      Boolean                         forCurrentUserOnly;         /* -->  */
      Boolean                         filler1;
      DSSpec *                        startingPoint;              /* --> starting Point */
      Boolean                         includeStartingPoint;       /* --> if true return the record specified in starting point */
      Boolean                         filler2;
      void *                          getBuffer;                  /*    -> */
      unsigned long                   getBufferSize;              /*  -> */
  
  };
  typedef struct DirGetAttributeAccessControlParsePB DirGetAttributeAccessControlParsePB;
  
  /*
  MapPathNameToDNodeNumber:
  This call maps a given PathName within a catalog to its DNodeNumber.
  */
  
  struct DirMapPathNameToDNodeNumberPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      DirectoryNamePtr                directoryName;              /*  --> catalog name */
      DirDiscriminator                discriminator;              /*  --> discriminator */
      DNodeNum                        dNodeNumber;                /* <--  dNodenumber to the path */
      PackedPathNamePtr               path;                       /*  --> Path Name to be mapped */
  };
  typedef struct DirMapPathNameToDNodeNumberPB DirMapPathNameToDNodeNumberPB;
  /*
  PathName in the path field will be mapped to the cooresponding dNodeNumber and
  returned in the DNodeNumber field. directoryName and descriminator Fields are
  ignored. DSRefNum is used to identify the catalog.
  */
  
  /*
  MapDNodeNumberToPathName:
  This call will map a given DNodeNumber with in a catalog to the
  corresponding PathName.
  */
  
  struct DirMapDNodeNumberToPathNamePB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      DirectoryNamePtr                directoryName;              /*  --> catalog name */
      DirDiscriminator                discriminator;              /*  --> discriminator */
      DNodeNum                        dNodeNumber;                /*  --> dNodenumber to be mapped */
      PackedPathNamePtr               path;                       /* <--  Packed Path Name returned */
      unsigned short                  lengthOfPathName;           /*  --> length of packed pathName structure*/
  };
  typedef struct DirMapDNodeNumberToPathNamePB DirMapDNodeNumberToPathNamePB;
  /*
  dNodeNumber in the DNodeNumber field will be mapped to the cooresponding
  pathName and returned in the PackedPathName field.
  lengthOfPathName is to be set the length of pathName structure.
  If length of PackedPathName is larger then the lengthOfPathName, kOCEMoreData
  OSErr will be returned.
  */
  /*
  GetLocalNetworkSpec:
  This call will return the Local NetworkSpec. Client should supply
  an RString big enough to hold the NetworkSpec.
  */
  
  struct DirGetLocalNetworkSpecPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      DirectoryNamePtr                directoryName;              /*  --> catalog name */
      DirDiscriminator                discriminator;              /*  --> discriminator */
      NetworkSpecPtr                  networkSpec;                /* <--  NetworkSpec */
  };
  typedef struct DirGetLocalNetworkSpecPB DirGetLocalNetworkSpecPB;
  /*
  PathName in the path field must be set to nil. internetName should be large
  enough to hold the internetName. InterNetname returned indicates path finder's
  local internet (configured by administrator).
  */
  /*
  GetDNodeInfo:
  This call will return the information (internetName and descriptor)
  for the given RLI of a DNode.
  */
  
  struct DirGetDNodeInfoPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      PackedRLIPtr                    pRLI;                       /*  --> packed RLI whose info is requested */
      DirNodeKind                     descriptor;                 /* <--  dNode descriptor */
      NetworkSpecPtr                  networkSpec;                /* <--  cluster's networkSpec if kIsCluster */
  };
  typedef struct DirGetDNodeInfoPB        DirGetDNodeInfoPB;
  /*
  If DnodeNumber is set to a non zero value, path should be set to nil.
  if DnodeNumber is set to zero, pathName should point to a packed path name.
  internetName should be large enough to hold
  the internetName. (If the internetName is same as the one got by
  GetLocalInternetName call, it indicates cluster is reachable  without
  forwarders, --> Tell me if I am wrong)
  */
  
  /*
  DirCreatePersonalDirectory:
  A new  personal catalog can be created by specifying an FSSpec for
  the file. If a file already exists dupFNErr will be returned. This call is
  supported 'synchronous' mode only.
  */
  
  struct DirCreatePersonalDirectoryPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      FSSpecPtr                       fsSpec;                     /*  --> FSSpec for the Personal Catalog */
      OSType                          fdType;                     /*  --> file type for the Personal Catalog */
      OSType                          fdCreator;                  /*  --> file creator for the Personal Catalog */
  };
  typedef struct DirCreatePersonalDirectoryPB DirCreatePersonalDirectoryPB;
  /*
  DirOpenPersonalDirectory:
  An existing personal catalog can be opened using this call.
  User can specify the personal catalog by FSSpec for the AddressBook file.
  'accessRequested' field specifies open permissions. 'fsRdPerm'  & 'fsRdWrPerm'
  are the only accepted open modes for the address book.
  When the call completes successfully, a dsRefNum will be returned. The 'dsRefNum'
  field is in the DSParamBlockHeader. In addittion 'accessGranted' indicates
  actual permission with personal catalog is opened and 'features' indicate the capabilty flags
  associated with the personal catalog.
  This call is supported 'synchronous' mode only.
  */
  
  struct DirOpenPersonalDirectoryPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      FSSpecPtr                       fsSpec;                     /*  --> Open an existing Personal Catalog */
      SInt8                           accessRequested;            /*  --> Open: permissions Requested(byte)*/
      SInt8                           accessGranted;              /*  <-- Open: permissions (byte) (Granted)*/
      DirGestalt                      features;                   /* <--  features for Personal Catalog */
  };
  typedef struct DirOpenPersonalDirectoryPB DirOpenPersonalDirectoryPB;
  /*
  DirClosePersonalDirectory: This call lets a client close AddressBook opened by DirOpenPersonalDirectory.
  The Personal Catalog specified by the 'dsRefNum' will be closed.
  This call is supported 'synchronous' mode only.
  */
  
  struct DirClosePersonalDirectoryPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
  };
  typedef struct DirClosePersonalDirectoryPB DirClosePersonalDirectoryPB;
  
  /*
  DirMakePersonalDirectoryRLI: With this call a client can make an RLI
  for a Personal Catalog opened by DirOpenPersonalDirectory Call.
  A packed RLI is created for the Personal Catalog specified by the 'dsRefNum'.
  If a client has a need to make the AddressBook reference to persistent
  acrross boots it should make use of this call. In the current implementaion
  PackedRLI has an embeeded System7.0 'alias'. If in later time
  If client has a need to make reference to the AddressBook, it must use
  ADAPLibrary call 'DUExtractAlias' and resole the 'alias' to 'FSSpec' and
  make DirOpenPersonalDirectory call to get a 'dsRefNum'.
    'fromFSSpec'          FSPecPtr from which relative alias to be created. If nil,
                          absolute alias is created.
   'pRLIBufferSize' indicates the size of buffer pointed by 'pRLI'
   'pRLISize' indicates the actual length of 'pRLI'. If the call
                          fails with 'kOCEMoreData' error a client can reissue
                      this call with a larger buffer of this length.
    'pRLI' is pointer to the buffer in which 'PackedRLI' is
    returned.
  This call is supported in 'synchronous' mode only.
  */
  
  struct DirMakePersonalDirectoryRLIPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      FSSpecPtr                       fromFSSpec;                 /*  --> FSSpec for creating relative alia */
      unsigned short                  pRLIBufferSize;             /*  --> Length of 'pRLI' buffer */
      unsigned short                  pRLISize;                   /* <--  Length of actual 'pRLI' */
      PackedRLIPtr                    pRLI;                       /* <--  pRLI for the specified AddressBook */
  };
  typedef struct DirMakePersonalDirectoryRLIPB DirMakePersonalDirectoryRLIPB;
  
  

*************************************************************************** The calls described below apply only for CSAM Drivers:

  The following three calls provide capability to Install/Remove a CSAM at RunTime.
      DirAddDSAM
      DirRemoveDSAM
      DirInstantiateDSAM
  
  The following two calls provide capability to Install/Remove a CSAM Catalog at RunTime.
      DirAddDSAMDirectory
      DirRemoveDirectory
  
  DirGetDirectoryIcon call is used by clients to get any special icon associated
  with a CSAM catalog.
  
  *****************************************************************************/
  
  /*
  DirAddDSAM: This call can be used to inorm the availability of a CSAM file
  after discovering the CSAM file.
      dsamName -> is generic CSAM name e.g. Untitled X.500 directory
      dsamSignature -> could be generic CSAM kind e.g. 'X500'.
      fsSpec -> is the FileSpec for the file containing CSAM resources.
  If the call is successfull 'DSAMRecordCID' will be returned. If the
  call returns 'daDSAMRecordCIDExists', record was already there and
  'dsamRecordCID' will be returned.
  This call can be done only in synchronous mode.
  */
  
  struct DirAddDSAMPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      CreationID                      dsamRecordCID;              /* <--  CreationID for the CSAM record */
      RStringPtr                      dsamName;                   /*  --> CSAM name */
      OCEDirectoryKind                dsamKind;                   /*  --> CSAM kind */
      FSSpecPtr                       fsSpec;                     /*  --> FSSpec for the file containing CSAM */
  };
  typedef struct DirAddDSAMPB             DirAddDSAMPB;
  /*
  DirInstantiateDSAM: This call should be used by the CSAM driver in response
  Driver Open call to indicate the toolbox about the availability of the CSAM.
      dsamName -> is generic CSAM name e.g. Untitled X.500 directory
      dsamKind -> could be generic CSAM kind e.g. 'X500'.
      dsamData -> pointer to private DSAMData. This will be paased back to the CSAM
      when the CSAM functions (DSAMDirProc,DSAMDirParseProc, DSAMAuthProc) are called.
      CSAM should already be setup using DirAddDSAM call.
      DSAMDirProc -> This procedure will be called when  any catalog service
      call intended for the CSAM (other then parse calls)
      DSAMDirParseProc -> This procedure will be called when any of the parse calls
      are called.
      DSAMAuthProc -> This procedure will be called when any of the Authentication Calls
      are made to the CSAM. If the CSAM does not support authentication, this can be nil.
  This call can be done only in synchronous mode.
  */
  typedef CALLBACK_API( OSErr , DSAMDirProcPtr )(void *dsamData, DirParamBlockPtr paramBlock, Boolean async);
  typedef STACK_UPP_TYPE(DSAMDirProcPtr)                          DSAMDirUPP;
  
  typedef DSAMDirUPP                      DSAMDirProc;
  typedef CALLBACK_API( OSErr , DSAMDirParseProcPtr )(void *dsamData, DirParamBlockPtr paramBlock, Boolean async);
  typedef STACK_UPP_TYPE(DSAMDirParseProcPtr)                     DSAMDirParseUPP;
  typedef DSAMDirParseUPP                 DSAMDirParseProc;
  typedef CALLBACK_API( OSErr , DSAMAuthProcPtr )(void *dsamData, AuthParamBlockPtr pb, Boolean async);
  typedef STACK_UPP_TYPE(DSAMAuthProcPtr)                         DSAMAuthUPP;
  typedef DSAMAuthUPP                     DSAMAuthProc;
  
  struct DirInstantiateDSAMPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      RStringPtr                      dsamName;                   /*  --> dsamName name */
      OCEDirectoryKind                dsamKind;                   /*  --> DSAMKind */
      void *                          dsamData;                   /*  --> dsamData  */
      DSAMDirUPP                      dsamDirProc;                /*  --> of type DSAMDirProc: for catalog service calls */
      DSAMDirParseUPP                 dsamDirParseProc;           /*  --> of type DSAMDirParseProc: for catalog service parse calls */
      DSAMAuthUPP                     dsamAuthProc;               /*  --> of type DSAMAuthProc: for authetication service calls */
  };
  typedef struct DirInstantiateDSAMPB     DirInstantiateDSAMPB;
  
  /*
  DirRemoveDSAM: This call can be used to remove  a CSAM file from the OCE Setup.
      dsamRecordCID -> is the creationID of the CSAM record.
  This call can be made only in synchronous mode.
  */
  
  struct DirRemoveDSAMPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      CreationID                      dsamRecordCID;              /* <--  CreationID for the CSAM record */
  };
  typedef struct DirRemoveDSAMPB          DirRemoveDSAMPB;
  
  /*
  DirAddDSAMDirectory: This call can be used to inorm the availability of a CSAM catalog.
      dsamRecordCID ->  recordID for the CSAM serving this catalog
      directoryName ->  name of the catalog
      discriminator -> discriminator for the catalog
      directoryRecordCID -> If the call is successful, creationID for the record will
                              be returned.
  */
  
  struct DirAddDSAMDirectoryPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      CreationID                      dsamRecordCID;              /*  --> CreationID for the CSAM record */
      DirectoryNamePtr                directoryName;              /*  --> catalog name */
      DirDiscriminator                discriminator;              /*  --> catalog discriminator */
      DirGestalt                      features;                   /*  --> capabilty flags for the catalog */
      CreationID                      directoryRecordCID;         /* <--  creationID for the catalog record */
  };
  typedef struct DirAddDSAMDirectoryPB    DirAddDSAMDirectoryPB;
  /*
  DirRemoveDirectory: This call can be used to inform the toolbox that
  catalog specified by 'directoryRecordCID'
  */
  
  struct DirRemoveDirectoryPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      CreationID                      directoryRecordCID;         /*  --> creationID for the catalog record */
  };
  typedef struct DirRemoveDirectoryPB     DirRemoveDirectoryPB;
  /*
   * DSGetExtendedDirectoriesInfo::  This call can be used to get
   * the information of various foreign catalogs supported.
   * Typically a DE Template  may make this call to create a
   * Address template or a Gateway may make this call to findout
   * catalog name space in which MSAM may would support. 
   * Client will supply a buffer pointed by 'bufferPtr' of size 'bufferLength'. 
   * When the call completes with 'daMoreData' error, client can examine 'totalEntries'
   * returned and reissue the call with increaing buffer.
   * Toolbox will findout the private information of each of the Foreign Catalogs
   * by polling CSAM's, Gateways, and MnMServers. The Information returned
   * for each catalog will be packed in the format: 
   * typedef struct EachDirectoryData {
   *  PackedRLI                       pRLI;          //  packed RLI for the catalog
   *  OSType                          entnType;      //  Entn Type
   *  long                            hasMailSlot;   //  If this catalog has mail slot this will be 1 otherwise zero
   *  ProtoRString                    RealName;      //  Packed RString for Real Name (padded to even boundary) 
   *  ProtoRString                    comment;       //  Packed RString holding any comment for Display (padded to even boundary)
   *  long                            length;        //  data length
   *  char                            data[length];  //  data padded to even boundary
   * };
   *
   *
   *
   * typedef struct myData {
   *      EachDirectoryData   data[numberOfEntries];    // data packed in the above format
   *  };
   *
   */
  
  struct DirGetExtendedDirectoriesInfoPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      void *                          buffer;                     /*  --> Pointer to a buufer where data will be returned */
      unsigned long                   bufferSize;                 /*  --> Length of the buffer, Length of actual data will be returned here */
      unsigned long                   totalEntries;               /* <--  Total Number of Catalogs found */
      unsigned long                   actualEntries;              /* <--  Total Number of Catalogs entries returned */
  };
  typedef struct DirGetExtendedDirectoriesInfoPB DirGetExtendedDirectoriesInfoPB;
  /*
  DirGetDirectoryIconPB: With this call a client can find out about
  the icons supported by the Catalog.
  Both ADAP and Personal Catalog will not support this call for now.
  A CSAM can support a call so that DE Extension can use this
  call to find appropriate Icons.
  
  Returns kOCEBufferTooSmall if icon is too small, but will update iconSize.
  */
  
  struct DirGetDirectoryIconPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      PackedRLIPtr                    pRLI;                       /*  --> packed RLI for the catalog */
      OSType                          iconType;                   /*  --> Type of Icon requested */
      void *                          iconBuffer;                 /*  --> Buffer to hold Icon Data */
      unsigned long                   bufferSize;                 /*  <-> size of buffer to hold icon data */
  };
  typedef struct DirGetDirectoryIconPB    DirGetDirectoryIconPB;
  /*
  DirGetOCESetupRefNum: This call will return 'dsRefnum' for the OCE Setup Personal Catalog
  and oceSetupRecordCID for the oceSetup Record.
  Clients interested in manipulating OCE Setup Personal Catalog directly should
  make this call to get 'dsRefNum'.
  'dsRefNum' will be returned in the standard field in the DirParamHeader.
  */
  
  struct DirGetOCESetupRefNumPB {
      void *                          qLink;
      long                            reserved1;
      long                            reserved2;
      DirIOCompletionUPP              ioCompletion;
      OSErr                           ioResult;
      unsigned long                   saveA5;
      short                           reqCode;
      long                            reserved[2];
      AddrBlock                       serverHint;
      short                           dsRefNum;
      unsigned long                   callID;
      AuthIdentity                    identity;
      long                            gReserved1;
      long                            gReserved2;
      long                            gReserved3;
      long                            clientData;
      CreationID                      oceSetupRecordCID;          /* --> creationID for the catalog record */
  };
  typedef struct DirGetOCESetupRefNumPB   DirGetOCESetupRefNumPB;
  
  

**************************************************************************

  
  /* Catalog and Authentication control blocks and operation definitions */
  
  union AuthParamBlock {
      struct {
          void *                          qLink;
          long                            reserved1;
          long                            reserved2;
          AuthIOCompletionUPP             ioCompletion;
          OSErr                           ioResult;
          unsigned long                   saveA5;
          short                           reqCode;
          long                            reserved[2];
          AddrBlock                       serverHint;
          short                           dsRefNum;
          unsigned long                   callID;
          AuthIdentity                    identity;
          long                            gReserved1;
          long                            gReserved2;
          long                            gReserved3;
          long                            clientData;
      }                                 header;
      AuthBindSpecificIdentityPB      bindIdentityPB;
      AuthUnbindSpecificIdentityPB    unbindIdentityPB;
      AuthResolveCreationIDPB         resolveCreationIDPB;
      AuthGetSpecificIdentityInfoPB   getIdentityInfoPB;
      AuthAddKeyPB                    addKeyPB;
      AuthChangeKeyPB                 changeKeyPB;
      AuthDeleteKeyPB                 deleteKeyPB;
      AuthPasswordToKeyPB             passwordToKeyPB;
      AuthGetCredentialsPB            getCredentialsPB;
      AuthDecryptCredentialsPB        decryptCredentialsPB;
      AuthMakeChallengePB             makeChallengePB;
      AuthMakeReplyPB                 makeReplyPB;
      AuthVerifyReplyPB               verifyReplyPB;
      AuthGetUTCTimePB                getUTCTimePB;
      AuthMakeProxyPB                 makeProxyPB;
      AuthTradeProxyForCredentialsPB  tradeProxyForCredentialsPB;
      AuthGetLocalIdentityPB          getLocalIdentityPB;
      AuthUnlockLocalIdentityPB       unLockLocalIdentityPB;
      AuthLockLocalIdentityPB         lockLocalIdentityPB;
      AuthAddToLocalIdentityQueuePB   localIdentityQInstallPB;
      AuthRemoveFromLocalIdentityQueuePB  localIdentityQRemovePB;
      AuthSetupLocalIdentityPB        setupLocalIdentityPB;
      AuthChangeLocalIdentityPB       changeLocalIdentityPB;
      AuthRemoveLocalIdentityPB       removeLocalIdentityPB;
      OCESetupAddDirectoryInfoPB      setupDirectoryIdentityPB;
      OCESetupChangeDirectoryInfoPB   changeDirectoryIdentityPB;
      OCESetupRemoveDirectoryInfoPB   removeDirectoryIdentityPB;
      OCESetupGetDirectoryInfoPB      getDirectoryIdentityInfoPB;
  };
  
  union DirParamBlock {
      struct {
          void *                          qLink;
          long                            reserved1;
          long                            reserved2;
          DirIOCompletionUPP              ioCompletion;
          OSErr                           ioResult;
          unsigned long                   saveA5;
          short                           reqCode;
          long                            reserved[2];
          AddrBlock                       serverHint;
          short                           dsRefNum;
          unsigned long                   callID;
          AuthIdentity                    identity;
          long                            gReserved1;
          long                            gReserved2;
          long                            gReserved3;
          long                            clientData;
      }                                 header;
      DirAddRecordPB                  addRecordPB;
      DirDeleteRecordPB               deleteRecordPB;
      DirEnumerateGetPB               enumerateGetPB;
      DirEnumerateParsePB             enumerateParsePB;
      DirFindRecordGetPB              findRecordGetPB;
      DirFindRecordParsePB            findRecordParsePB;
      DirLookupGetPB                  lookupGetPB;
      DirLookupParsePB                lookupParsePB;
      DirAddAttributeValuePB          addAttributeValuePB;
      DirDeleteAttributeTypePB        deleteAttributeTypePB;
      DirDeleteAttributeValuePB       deleteAttributeValuePB;
      DirChangeAttributeValuePB       changeAttributeValuePB;
      DirVerifyAttributeValuePB       verifyAttributeValuePB;
      DirFindValuePB                  findValuePB;
      DirEnumeratePseudonymGetPB      enumeratePseudonymGetPB;
      DirEnumeratePseudonymParsePB    enumeratePseudonymParsePB;
      DirAddPseudonymPB               addPseudonymPB;
      DirDeletePseudonymPB            deletePseudonymPB;
      DirAddAliasPB                   addAliasPB;
      DirEnumerateAttributeTypesGetPB  enumerateAttributeTypesGetPB;
      DirEnumerateAttributeTypesParsePB  enumerateAttributeTypesParsePB;
      DirGetNameAndTypePB             getNameAndTypePB;
      DirSetNameAndTypePB             setNameAndTypePB;
      DirGetRecordMetaInfoPB          getRecordMetaInfoPB;
      DirGetDNodeMetaInfoPB           getDNodeMetaInfoPB;
      DirGetDirectoryInfoPB           getDirectoryInfoPB;
  
      DirGetDNodeAccessControlGetPB   getDNodeAccessControlGetPB;
      DirGetDNodeAccessControlParsePB  getDNodeAccessControlParsePB;
  
      DirGetRecordAccessControlGetPB  getRecordAccessControlGetPB;
      DirGetRecordAccessControlParsePB  getRecordAccessControlParsePB;
  
      DirGetAttributeAccessControlGetPB  getAttributeAccessControlGetPB;
      DirGetAttributeAccessControlParsePB  getAttributeAccessControlParsePB;
  
      DirEnumerateDirectoriesGetPB    enumerateDirectoriesGetPB;
      DirEnumerateDirectoriesParsePB  enumerateDirectoriesParsePB;
  
      DirAddADAPDirectoryPB           addADAPDirectoryPB;
      DirRemoveDirectoryPB            removeDirectoryPB;
      DirNetSearchADAPDirectoriesGetPB  netSearchADAPDirectoriesGetPB;
      DirNetSearchADAPDirectoriesParsePB  netSearchADAPDirectoriesParsePB;
      DirFindADAPDirectoryByNetSearchPB  findADAPDirectoryByNetSearchPB;
  
      DirMapDNodeNumberToPathNamePB   mapDNodeNumberToPathNamePB;
      DirMapPathNameToDNodeNumberPB   mapPathNameToDNodeNumberPB;
      DirGetLocalNetworkSpecPB        getLocalNetworkSpecPB;
      DirGetDNodeInfoPB               getDNodeInfoPB;
  
      DirCreatePersonalDirectoryPB    createPersonalDirectoryPB;
      DirOpenPersonalDirectoryPB      openPersonalDirectoryPB;
      DirClosePersonalDirectoryPB     closePersonalDirectoryPB;
      DirMakePersonalDirectoryRLIPB   makePersonalDirectoryRLIPB;
  
      DirAddDSAMPB                    addDSAMPB;
      DirInstantiateDSAMPB            instantiateDSAMPB;
      DirRemoveDSAMPB                 removeDSAMPB;
      DirAddDSAMDirectoryPB           addDSAMDirectoryPB;
      DirGetExtendedDirectoriesInfoPB  getExtendedDirectoriesInfoPB;
      DirGetDirectoryIconPB           getDirectoryIconPB;
  
      DirGetOCESetupRefNumPB          dirGetOCESetupRefNumPB;
  
      DirAbortPB                      abortPB;
  };
  
  if OPAQUE_UPP_TYPES
  if CALL_NOT_IN_CARBON
      EXTERN_API(AuthIOCompletionUPP)
      NewAuthIOCompletionUPP         (AuthIOCompletionProcPtr userRoutine);
  
      EXTERN_API(NotificationUPP)
      NewNotificationUPP             (NotificationProcPtr     userRoutine);
  
      EXTERN_API(DirIOCompletionUPP)
      NewDirIOCompletionUPP          (DirIOCompletionProcPtr  userRoutine);
  
      EXTERN_API(ForEachDirEnumSpecUPP)
      NewForEachDirEnumSpecUPP       (ForEachDirEnumSpecProcPtr userRoutine);
  
      EXTERN_API(ForEachRecordUPP)
      NewForEachRecordUPP            (ForEachRecordProcPtr    userRoutine);
  
      EXTERN_API(ForEachLookupRecordIDUPP)
      NewForEachLookupRecordIDUPP    (ForEachLookupRecordIDProcPtr userRoutine);
  
      EXTERN_API(ForEachAttrTypeLookupUPP)
      NewForEachAttrTypeLookupUPP    (ForEachAttrTypeLookupProcPtr userRoutine);
  
      EXTERN_API(ForEachAttrValueUPP)
      NewForEachAttrValueUPP         (ForEachAttrValueProcPtr userRoutine);
  
      EXTERN_API(ForEachAttrTypeUPP)
      NewForEachAttrTypeUPP          (ForEachAttrTypeProcPtr  userRoutine);
  
      EXTERN_API(ForEachRecordIDUPP)
      NewForEachRecordIDUPP          (ForEachRecordIDProcPtr  userRoutine);
  
      EXTERN_API(ForEachDirectoryUPP)
      NewForEachDirectoryUPP         (ForEachDirectoryProcPtr userRoutine);
  
      EXTERN_API(ForEachADAPDirectoryUPP)
      NewForEachADAPDirectoryUPP     (ForEachADAPDirectoryProcPtr userRoutine);
  
      EXTERN_API(ForEachDNodeAccessControlUPP)
      NewForEachDNodeAccessControlUPP    (ForEachDNodeAccessControlProcPtr userRoutine);
  
      EXTERN_API(ForEachRecordAccessControlUPP)
      NewForEachRecordAccessControlUPP    (ForEachRecordAccessControlProcPtr userRoutine);
  
      EXTERN_API(ForEachAttributeAccessControlUPP)
      NewForEachAttributeAccessControlUPP    (ForEachAttributeAccessControlProcPtr userRoutine);
  
      EXTERN_API(DSAMDirUPP)
      NewDSAMDirUPP                  (DSAMDirProcPtr          userRoutine);
  
      EXTERN_API(DSAMDirParseUPP)
      NewDSAMDirParseUPP             (DSAMDirParseProcPtr     userRoutine);
  
      EXTERN_API(DSAMAuthUPP)
      NewDSAMAuthUPP                 (DSAMAuthProcPtr         userRoutine);
  
      EXTERN_API(void)
      DisposeAuthIOCompletionUPP     (AuthIOCompletionUPP     userUPP);
  
      EXTERN_API(void)
      DisposeNotificationUPP         (NotificationUPP         userUPP);
  
      EXTERN_API(void)
      DisposeDirIOCompletionUPP      (DirIOCompletionUPP      userUPP);
  
      EXTERN_API(void)
      DisposeForEachDirEnumSpecUPP    (ForEachDirEnumSpecUPP  userUPP);
  
      EXTERN_API(void)
      DisposeForEachRecordUPP        (ForEachRecordUPP        userUPP);
  
      EXTERN_API(void)
      DisposeForEachLookupRecordIDUPP    (ForEachLookupRecordIDUPP userUPP);
  
      EXTERN_API(void)
      DisposeForEachAttrTypeLookupUPP    (ForEachAttrTypeLookupUPP userUPP);
  
      EXTERN_API(void)
      DisposeForEachAttrValueUPP     (ForEachAttrValueUPP     userUPP);
  
      EXTERN_API(void)
      DisposeForEachAttrTypeUPP      (ForEachAttrTypeUPP      userUPP);
  
      EXTERN_API(void)
      DisposeForEachRecordIDUPP      (ForEachRecordIDUPP      userUPP);
  
      EXTERN_API(void)
      DisposeForEachDirectoryUPP     (ForEachDirectoryUPP     userUPP);
  
      EXTERN_API(void)
      DisposeForEachADAPDirectoryUPP    (ForEachADAPDirectoryUPP userUPP);
  
      EXTERN_API(void)
      DisposeForEachDNodeAccessControlUPP    (ForEachDNodeAccessControlUPP userUPP);
  
      EXTERN_API(void)
      DisposeForEachRecordAccessControlUPP    (ForEachRecordAccessControlUPP userUPP);
  
      EXTERN_API(void)
      DisposeForEachAttributeAccessControlUPP    (ForEachAttributeAccessControlUPP userUPP);
  
      EXTERN_API(void)
      DisposeDSAMDirUPP              (DSAMDirUPP              userUPP);
  
      EXTERN_API(void)
      DisposeDSAMDirParseUPP         (DSAMDirParseUPP         userUPP);
  
      EXTERN_API(void)
      DisposeDSAMAuthUPP             (DSAMAuthUPP             userUPP);
  
      EXTERN_API(void)
      InvokeAuthIOCompletionUPP      (AuthParamBlockPtr       paramBlock,
                                      AuthIOCompletionUPP     userUPP);
  
      EXTERN_API(Boolean)
      InvokeNotificationUPP          (long                    clientData,
                                      AuthLocalIdentityOp     callValue,
                                      AuthLocalIdentityLockAction actionValue,
                                      LocalIdentity           identity,
                                      NotificationUPP         userUPP);
  
      EXTERN_API(void)
      InvokeDirIOCompletionUPP       (DirParamBlockPtr        paramBlock,
                                      DirIOCompletionUPP      userUPP);
  
      EXTERN_API(Boolean)
      InvokeForEachDirEnumSpecUPP    (long                    clientData,
                                      const DirEnumSpec *     enumSpec,
                                      ForEachDirEnumSpecUPP   userUPP);
  
      EXTERN_API(Boolean)
      InvokeForEachRecordUPP         (long                    clientData,
                                      const DirEnumSpec *     enumSpec,
                                      PackedRLIPtr            pRLI,
                                      ForEachRecordUPP        userUPP);
  
      EXTERN_API(Boolean)
      InvokeForEachLookupRecordIDUPP    (long                 clientData,
                                      const RecordID *        recordID,
                                      ForEachLookupRecordIDUPP userUPP);
  
      EXTERN_API(Boolean)
      InvokeForEachAttrTypeLookupUPP    (long                 clientData,
                                      const AttributeType *   attrType,
                                      AccessMask              myAttrAccMask,
                                      ForEachAttrTypeLookupUPP userUPP);
  
      EXTERN_API(Boolean)
      InvokeForEachAttrValueUPP      (long                    clientData,
                                      const Attribute *       attribute,
                                      ForEachAttrValueUPP     userUPP);
  
      EXTERN_API(Boolean)
      InvokeForEachAttrTypeUPP       (long                    clientData,
                                      const AttributeType *   attrType,
                                      ForEachAttrTypeUPP      userUPP);
  
      EXTERN_API(Boolean)
      InvokeForEachRecordIDUPP       (long                    clientData,
                                      const RecordID *        recordID,
                                      ForEachRecordIDUPP      userUPP);
  
      EXTERN_API(Boolean)
      InvokeForEachDirectoryUPP      (long                    clientData,
                                      const DirectoryName *   dirName,
                                      const DirDiscriminator * discriminator,
                                      DirGestalt              features,
                                      ForEachDirectoryUPP     userUPP);
  
      EXTERN_API(Boolean)
      InvokeForEachADAPDirectoryUPP    (long                  clientData,
                                      const DirectoryName *   dirName,
                                      const DirDiscriminator * discriminator,
                                      DirGestalt              features,
                                      AddrBlock               serverHint,
                                      ForEachADAPDirectoryUPP userUPP);
  
      EXTERN_API(Boolean)
      InvokeForEachDNodeAccessControlUPP    (long             clientData,
                                      const DSSpec *          dsObj,
                                      AccessMask              activeDnodeAccMask,
                                      AccessMask              defaultRecordAccMask,
                                      AccessMask              defaultAttributeAccMask,
                                      ForEachDNodeAccessControlUPP userUPP);
  
      EXTERN_API(Boolean)
      InvokeForEachRecordAccessControlUPP    (long            clientData,
                                      const DSSpec *          dsObj,
                                      AccessMask              activeDnodeAccMask,
                                      AccessMask              activeRecordAccMask,
                                      AccessMask              defaultAttributeAccMask,
                                      ForEachRecordAccessControlUPP userUPP);
  
      EXTERN_API(Boolean)
      InvokeForEachAttributeAccessControlUPP    (long         clientData,
                                      const DSSpec *          dsObj,
                                      AccessMask              activeDnodeAccMask,
                                      AccessMask              activeRecordAccMask,
                                      AccessMask              activeAttributeAccMask,
                                      ForEachAttributeAccessControlUPP userUPP);
  
      EXTERN_API(OSErr)
      InvokeDSAMDirUPP               (void *                  dsamData,
                                      DirParamBlockPtr        paramBlock,
                                      Boolean                 async,
                                      DSAMDirUPP              userUPP);
  
      EXTERN_API(OSErr)
      InvokeDSAMDirParseUPP          (void *                  dsamData,
                                      DirParamBlockPtr        paramBlock,
                                      Boolean                 async,
                                      DSAMDirParseUPP         userUPP);
  
      EXTERN_API(OSErr)
      InvokeDSAMAuthUPP              (void *                  dsamData,
                                      AuthParamBlockPtr       pb,
                                      Boolean                 async,
                                      DSAMAuthUPP             userUPP);
  
  endif  /* CALL_NOT_IN_CARBON */
  
  else
      enum { uppAuthIOCompletionProcInfo = 0x00009802 };              /* register no_return_value Func(4_bytes:A0) */
      enum { uppNotificationProcInfo = 0x00003FD0 };                  /* pascal 1_byte Func(4_bytes, 4_bytes, 4_bytes, 4_bytes) */
      enum { uppDirIOCompletionProcInfo = 0x00009802 };               /* register no_return_value Func(4_bytes:A0) */
      enum { uppForEachDirEnumSpecProcInfo = 0x000003D0 };            /* pascal 1_byte Func(4_bytes, 4_bytes) */
      enum { uppForEachRecordProcInfo = 0x00000FD0 };                 /* pascal 1_byte Func(4_bytes, 4_bytes, 4_bytes) */
      enum { uppForEachLookupRecordIDProcInfo = 0x000003D0 };         /* pascal 1_byte Func(4_bytes, 4_bytes) */
      enum { uppForEachAttrTypeLookupProcInfo = 0x00000FD0 };         /* pascal 1_byte Func(4_bytes, 4_bytes, 4_bytes) */
      enum { uppForEachAttrValueProcInfo = 0x000003D0 };              /* pascal 1_byte Func(4_bytes, 4_bytes) */
      enum { uppForEachAttrTypeProcInfo = 0x000003D0 };               /* pascal 1_byte Func(4_bytes, 4_bytes) */
      enum { uppForEachRecordIDProcInfo = 0x000003D0 };               /* pascal 1_byte Func(4_bytes, 4_bytes) */
      enum { uppForEachDirectoryProcInfo = 0x00003FD0 };              /* pascal 1_byte Func(4_bytes, 4_bytes, 4_bytes, 4_bytes) */
      enum { uppForEachADAPDirectoryProcInfo = 0x0000FFD0 };          /* pascal 1_byte Func(4_bytes, 4_bytes, 4_bytes, 4_bytes, 4_bytes) */
      enum { uppForEachDNodeAccessControlProcInfo = 0x0000FFD0 };     /* pascal 1_byte Func(4_bytes, 4_bytes, 4_bytes, 4_bytes, 4_bytes) */
      enum { uppForEachRecordAccessControlProcInfo = 0x0000FFD0 };    /* pascal 1_byte Func(4_bytes, 4_bytes, 4_bytes, 4_bytes, 4_bytes) */
      enum { uppForEachAttributeAccessControlProcInfo = 0x0000FFD0 };  /* pascal 1_byte Func(4_bytes, 4_bytes, 4_bytes, 4_bytes, 4_bytes) */
      enum { uppDSAMDirProcInfo = 0x000007E0 };                       /* pascal 2_bytes Func(4_bytes, 4_bytes, 1_byte) */
      enum { uppDSAMDirParseProcInfo = 0x000007E0 };                  /* pascal 2_bytes Func(4_bytes, 4_bytes, 1_byte) */
      enum { uppDSAMAuthProcInfo = 0x000007E0 };                      /* pascal 2_bytes Func(4_bytes, 4_bytes, 1_byte) */
      #define NewAuthIOCompletionUPP(userRoutine)                     (AuthIOCompletionUPP)NewRoutineDescriptor((ProcPtr)(userRoutine), uppAuthIOCompletionProcInfo, GetCurrentArchitecture())
      #define NewNotificationUPP(userRoutine)                         (NotificationUPP)NewRoutineDescriptor((ProcPtr)(userRoutine), uppNotificationProcInfo, GetCurrentArchitecture())
      #define NewDirIOCompletionUPP(userRoutine)                      (DirIOCompletionUPP)NewRoutineDescriptor((ProcPtr)(userRoutine), uppDirIOCompletionProcInfo, GetCurrentArchitecture())
      #define NewForEachDirEnumSpecUPP(userRoutine)                   (ForEachDirEnumSpecUPP)NewRoutineDescriptor((ProcPtr)(userRoutine), uppForEachDirEnumSpecProcInfo, GetCurrentArchitecture())
      #define NewForEachRecordUPP(userRoutine)                        (ForEachRecordUPP)NewRoutineDescriptor((ProcPtr)(userRoutine), uppForEachRecordProcInfo, GetCurrentArchitecture())
      #define NewForEachLookupRecordIDUPP(userRoutine)                (ForEachLookupRecordIDUPP)NewRoutineDescriptor((ProcPtr)(userRoutine), uppForEachLookupRecordIDProcInfo, GetCurrentArchitecture())
      #define NewForEachAttrTypeLookupUPP(userRoutine)                (ForEachAttrTypeLookupUPP)NewRoutineDescriptor((ProcPtr)(userRoutine), uppForEachAttrTypeLookupProcInfo, GetCurrentArchitecture())
      #define NewForEachAttrValueUPP(userRoutine)                     (ForEachAttrValueUPP)NewRoutineDescriptor((ProcPtr)(userRoutine), uppForEachAttrValueProcInfo, GetCurrentArchitecture())
      #define NewForEachAttrTypeUPP(userRoutine)                      (ForEachAttrTypeUPP)NewRoutineDescriptor((ProcPtr)(userRoutine), uppForEachAttrTypeProcInfo, GetCurrentArchitecture())
      #define NewForEachRecordIDUPP(userRoutine)                      (ForEachRecordIDUPP)NewRoutineDescriptor((ProcPtr)(userRoutine), uppForEachRecordIDProcInfo, GetCurrentArchitecture())
      #define NewForEachDirectoryUPP(userRoutine)                     (ForEachDirectoryUPP)NewRoutineDescriptor((ProcPtr)(userRoutine), uppForEachDirectoryProcInfo, GetCurrentArchitecture())
      #define NewForEachADAPDirectoryUPP(userRoutine)                 (ForEachADAPDirectoryUPP)NewRoutineDescriptor((ProcPtr)(userRoutine), uppForEachADAPDirectoryProcInfo, GetCurrentArchitecture())
      #define NewForEachDNodeAccessControlUPP(userRoutine)            (ForEachDNodeAccessControlUPP)NewRoutineDescriptor((ProcPtr)(userRoutine), uppForEachDNodeAccessControlProcInfo, GetCurrentArchitecture())
      #define NewForEachRecordAccessControlUPP(userRoutine)           (ForEachRecordAccessControlUPP)NewRoutineDescriptor((ProcPtr)(userRoutine), uppForEachRecordAccessControlProcInfo, GetCurrentArchitecture())
      #define NewForEachAttributeAccessControlUPP(userRoutine)        (ForEachAttributeAccessControlUPP)NewRoutineDescriptor((ProcPtr)(userRoutine), uppForEachAttributeAccessControlProcInfo, GetCurrentArchitecture())
      #define NewDSAMDirUPP(userRoutine)                              (DSAMDirUPP)NewRoutineDescriptor((ProcPtr)(userRoutine), uppDSAMDirProcInfo, GetCurrentArchitecture())
      #define NewDSAMDirParseUPP(userRoutine)                         (DSAMDirParseUPP)NewRoutineDescriptor((ProcPtr)(userRoutine), uppDSAMDirParseProcInfo, GetCurrentArchitecture())
      #define NewDSAMAuthUPP(userRoutine)                             (DSAMAuthUPP)NewRoutineDescriptor((ProcPtr)(userRoutine), uppDSAMAuthProcInfo, GetCurrentArchitecture())
      #define DisposeAuthIOCompletionUPP(userUPP)                     DisposeRoutineDescriptor(userUPP)
      #define DisposeNotificationUPP(userUPP)                         DisposeRoutineDescriptor(userUPP)
      #define DisposeDirIOCompletionUPP(userUPP)                      DisposeRoutineDescriptor(userUPP)
      #define DisposeForEachDirEnumSpecUPP(userUPP)                   DisposeRoutineDescriptor(userUPP)
      #define DisposeForEachRecordUPP(userUPP)                        DisposeRoutineDescriptor(userUPP)
      #define DisposeForEachLookupRecordIDUPP(userUPP)                DisposeRoutineDescriptor(userUPP)
      #define DisposeForEachAttrTypeLookupUPP(userUPP)                DisposeRoutineDescriptor(userUPP)
      #define DisposeForEachAttrValueUPP(userUPP)                     DisposeRoutineDescriptor(userUPP)
      #define DisposeForEachAttrTypeUPP(userUPP)                      DisposeRoutineDescriptor(userUPP)
      #define DisposeForEachRecordIDUPP(userUPP)                      DisposeRoutineDescriptor(userUPP)
      #define DisposeForEachDirectoryUPP(userUPP)                     DisposeRoutineDescriptor(userUPP)
      #define DisposeForEachADAPDirectoryUPP(userUPP)                 DisposeRoutineDescriptor(userUPP)
      #define DisposeForEachDNodeAccessControlUPP(userUPP)            DisposeRoutineDescriptor(userUPP)
      #define DisposeForEachRecordAccessControlUPP(userUPP)           DisposeRoutineDescriptor(userUPP)
      #define DisposeForEachAttributeAccessControlUPP(userUPP)        DisposeRoutineDescriptor(userUPP)
      #define DisposeDSAMDirUPP(userUPP)                              DisposeRoutineDescriptor(userUPP)
      #define DisposeDSAMDirParseUPP(userUPP)                         DisposeRoutineDescriptor(userUPP)
      #define DisposeDSAMAuthUPP(userUPP)                             DisposeRoutineDescriptor(userUPP)
      #if TARGET_OS_MAC && TARGET_CPU_68K && !TARGET_RT_MAC_CFM
      #pragma parameter InvokeAuthIOCompletionUPP(__A0, __A1)
      void InvokeAuthIOCompletionUPP(AuthParamBlockPtr paramBlock, AuthIOCompletionUPP userUPP) = 0x4E91;
      #else
          #define InvokeAuthIOCompletionUPP(paramBlock, userUPP)          CALL_ONE_PARAMETER_UPP((userUPP), uppAuthIOCompletionProcInfo, (paramBlock))
      #endif
      #define InvokeNotificationUPP(clientData, callValue, actionValue, identity, userUPP)  (Boolean)CALL_FOUR_PARAMETER_UPP((userUPP), uppNotificationProcInfo, (clientData), (callValue), (actionValue), (identity))
      #if TARGET_OS_MAC && TARGET_CPU_68K && !TARGET_RT_MAC_CFM
      #pragma parameter InvokeDirIOCompletionUPP(__A0, __A1)
      void InvokeDirIOCompletionUPP(DirParamBlockPtr paramBlock, DirIOCompletionUPP userUPP) = 0x4E91;
      #else
          #define InvokeDirIOCompletionUPP(paramBlock, userUPP)           CALL_ONE_PARAMETER_UPP((userUPP), uppDirIOCompletionProcInfo, (paramBlock))
      #endif
      #define InvokeForEachDirEnumSpecUPP(clientData, enumSpec, userUPP)  (Boolean)CALL_TWO_PARAMETER_UPP((userUPP), uppForEachDirEnumSpecProcInfo, (clientData), (enumSpec))
      #define InvokeForEachRecordUPP(clientData, enumSpec, pRLI, userUPP)  (Boolean)CALL_THREE_PARAMETER_UPP((userUPP), uppForEachRecordProcInfo, (clientData), (enumSpec), (pRLI))
      #define InvokeForEachLookupRecordIDUPP(clientData, recordID, userUPP)  (Boolean)CALL_TWO_PARAMETER_UPP((userUPP), uppForEachLookupRecordIDProcInfo, (clientData), (recordID))
      #define InvokeForEachAttrTypeLookupUPP(clientData, attrType, myAttrAccMask, userUPP)  (Boolean)CALL_THREE_PARAMETER_UPP((userUPP), uppForEachAttrTypeLookupProcInfo, (clientData), (attrType), (myAttrAccMask))
      #define InvokeForEachAttrValueUPP(clientData, attribute, userUPP)  (Boolean)CALL_TWO_PARAMETER_UPP((userUPP), uppForEachAttrValueProcInfo, (clientData), (attribute))
      #define InvokeForEachAttrTypeUPP(clientData, attrType, userUPP)  (Boolean)CALL_TWO_PARAMETER_UPP((userUPP), uppForEachAttrTypeProcInfo, (clientData), (attrType))
      #define InvokeForEachRecordIDUPP(clientData, recordID, userUPP)  (Boolean)CALL_TWO_PARAMETER_UPP((userUPP), uppForEachRecordIDProcInfo, (clientData), (recordID))
      #define InvokeForEachDirectoryUPP(clientData, dirName, discriminator, features, userUPP)  (Boolean)CALL_FOUR_PARAMETER_UPP((userUPP), uppForEachDirectoryProcInfo, (clientData), (dirName), (discriminator), (features))
      #define InvokeForEachADAPDirectoryUPP(clientData, dirName, discriminator, features, serverHint, userUPP)  (Boolean)CALL_FIVE_PARAMETER_UPP((userUPP), uppForEachADAPDirectoryProcInfo, (clientData), (dirName), (discriminator), (features), (serverHint))
      #define InvokeForEachDNodeAccessControlUPP(clientData, dsObj, activeDnodeAccMask, defaultRecordAccMask, defaultAttributeAccMask, userUPP)  (Boolean)CALL_FIVE_PARAMETER_UPP((userUPP), uppForEachDNodeAccessControlProcInfo, (clientData), (dsObj), (activeDnodeAccMask), (defaultRecordAccMask), (defaultAttributeAccMask))
      #define InvokeForEachRecordAccessControlUPP(clientData, dsObj, activeDnodeAccMask, activeRecordAccMask, defaultAttributeAccMask, userUPP)  (Boolean)CALL_FIVE_PARAMETER_UPP((userUPP), uppForEachRecordAccessControlProcInfo, (clientData), (dsObj), (activeDnodeAccMask), (activeRecordAccMask), (defaultAttributeAccMask))
      #define InvokeForEachAttributeAccessControlUPP(clientData, dsObj, activeDnodeAccMask, activeRecordAccMask, activeAttributeAccMask, userUPP)  (Boolean)CALL_FIVE_PARAMETER_UPP((userUPP), uppForEachAttributeAccessControlProcInfo, (clientData), (dsObj), (activeDnodeAccMask), (activeRecordAccMask), (activeAttributeAccMask))
      #define InvokeDSAMDirUPP(dsamData, paramBlock, async, userUPP)  (OSErr)CALL_THREE_PARAMETER_UPP((userUPP), uppDSAMDirProcInfo, (dsamData), (paramBlock), (async))
      #define InvokeDSAMDirParseUPP(dsamData, paramBlock, async, userUPP)  (OSErr)CALL_THREE_PARAMETER_UPP((userUPP), uppDSAMDirParseProcInfo, (dsamData), (paramBlock), (async))
      #define InvokeDSAMAuthUPP(dsamData, pb, async, userUPP)         (OSErr)CALL_THREE_PARAMETER_UPP((userUPP), uppDSAMAuthProcInfo, (dsamData), (pb), (async))
  endif
  /* support for pre-Carbon UPP routines: NewXXXProc and CallXXXProc */
  define NewAuthIOCompletionProc(userRoutine)                    NewAuthIOCompletionUPP(userRoutine)
  define NewNotificationProc(userRoutine)                        NewNotificationUPP(userRoutine)
  define NewDirIOCompletionProc(userRoutine)                     NewDirIOCompletionUPP(userRoutine)
  define NewForEachDirEnumSpecProc(userRoutine)                  NewForEachDirEnumSpecUPP(userRoutine)
  define NewForEachRecordProc(userRoutine)                       NewForEachRecordUPP(userRoutine)
  define NewForEachLookupRecordIDProc(userRoutine)               NewForEachLookupRecordIDUPP(userRoutine)
  define NewForEachAttrTypeLookupProc(userRoutine)               NewForEachAttrTypeLookupUPP(userRoutine)
  define NewForEachAttrValueProc(userRoutine)                    NewForEachAttrValueUPP(userRoutine)
  define NewForEachAttrTypeProc(userRoutine)                     NewForEachAttrTypeUPP(userRoutine)
  define NewForEachRecordIDProc(userRoutine)                     NewForEachRecordIDUPP(userRoutine)
  define NewForEachDirectoryProc(userRoutine)                    NewForEachDirectoryUPP(userRoutine)
  define NewForEachADAPDirectoryProc(userRoutine)                NewForEachADAPDirectoryUPP(userRoutine)
  define NewForEachDNodeAccessControlProc(userRoutine)           NewForEachDNodeAccessControlUPP(userRoutine)
  define NewForEachRecordAccessControlProc(userRoutine)          NewForEachRecordAccessControlUPP(userRoutine)
  define NewForEachAttributeAccessControlProc(userRoutine)       NewForEachAttributeAccessControlUPP(userRoutine)
  define NewDSAMDirProc(userRoutine)                             NewDSAMDirUPP(userRoutine)
  define NewDSAMDirParseProc(userRoutine)                        NewDSAMDirParseUPP(userRoutine)
  define NewDSAMAuthProc(userRoutine)                            NewDSAMAuthUPP(userRoutine)
  define CallAuthIOCompletionProc(userRoutine, paramBlock)       InvokeAuthIOCompletionUPP(paramBlock, userRoutine)
  define CallNotificationProc(userRoutine, clientData, callValue, actionValue, identity) InvokeNotificationUPP(clientData, callValue, actionValue, identity, userRoutine)
  define CallDirIOCompletionProc(userRoutine, paramBlock)        InvokeDirIOCompletionUPP(paramBlock, userRoutine)
  define CallForEachDirEnumSpecProc(userRoutine, clientData, enumSpec) InvokeForEachDirEnumSpecUPP(clientData, enumSpec, userRoutine)
  define CallForEachRecordProc(userRoutine, clientData, enumSpec, pRLI) InvokeForEachRecordUPP(clientData, enumSpec, pRLI, userRoutine)
  define CallForEachLookupRecordIDProc(userRoutine, clientData, recordID) InvokeForEachLookupRecordIDUPP(clientData, recordID, userRoutine)
  define CallForEachAttrTypeLookupProc(userRoutine, clientData, attrType, myAttrAccMask) InvokeForEachAttrTypeLookupUPP(clientData, attrType, myAttrAccMask, userRoutine)
  define CallForEachAttrValueProc(userRoutine, clientData, attribute) InvokeForEachAttrValueUPP(clientData, attribute, userRoutine)
  define CallForEachAttrTypeProc(userRoutine, clientData, attrType) InvokeForEachAttrTypeUPP(clientData, attrType, userRoutine)
  define CallForEachRecordIDProc(userRoutine, clientData, recordID) InvokeForEachRecordIDUPP(clientData, recordID, userRoutine)
  define CallForEachDirectoryProc(userRoutine, clientData, dirName, discriminator, features) InvokeForEachDirectoryUPP(clientData, dirName, discriminator, features, userRoutine)
  define CallForEachADAPDirectoryProc(userRoutine, clientData, dirName, discriminator, features, serverHint) InvokeForEachADAPDirectoryUPP(clientData, dirName, discriminator, features, serverHint, userRoutine)
  define CallForEachDNodeAccessControlProc(userRoutine, clientData, dsObj, activeDnodeAccMask, defaultRecordAccMask, defaultAttributeAccMask) InvokeForEachDNodeAccessControlUPP(clientData, dsObj, activeDnodeAccMask, defaultRecordAccMask, defaultAttributeAccMask, userRoutine)
  define CallForEachRecordAccessControlProc(userRoutine, clientData, dsObj, activeDnodeAccMask, activeRecordAccMask, defaultAttributeAccMask) InvokeForEachRecordAccessControlUPP(clientData, dsObj, activeDnodeAccMask, activeRecordAccMask, defaultAttributeAccMask, userRoutine)
  define CallForEachAttributeAccessControlProc(userRoutine, clientData, dsObj, activeDnodeAccMask, activeRecordAccMask, activeAttributeAccMask) InvokeForEachAttributeAccessControlUPP(clientData, dsObj, activeDnodeAccMask, activeRecordAccMask, activeAttributeAccMask, userRoutine)
  define CallDSAMDirProc(userRoutine, dsamData, paramBlock, async) InvokeDSAMDirUPP(dsamData, paramBlock, async, userRoutine)
  define CallDSAMDirParseProc(userRoutine, dsamData, paramBlock, async) InvokeDSAMDirParseUPP(dsamData, paramBlock, async, userRoutine)
  define CallDSAMAuthProc(userRoutine, dsamData, pb, async)      InvokeDSAMAuthUPP(dsamData, pb, async, userRoutine)
  if CALL_NOT_IN_CARBON
  EXTERN_API( OSErr )
  AuthBindSpecificIdentity        (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0200, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthUnbindSpecificIdentity      (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0201, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthResolveCreationID           (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0202, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthGetSpecificIdentityInfo     (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0203, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthAddKey                      (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0207, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthChangeKey                   (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0208, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthDeleteKey                   (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0209, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthPasswordToKey               (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x020A, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthGetCredentials              (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x020B, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthDecryptCredentials          (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x020C, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthMakeChallenge               (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x020F, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthMakeReply                   (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0210, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthVerifyReply                 (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0211, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthGetUTCTime                  (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x021A, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthMakeProxy                   (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0212, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthTradeProxyForCredentials    (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0213, 0xAA5E);
  
  /* Local Identity API */
  EXTERN_API( OSErr )
  AuthGetLocalIdentity            (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0204, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthUnlockLocalIdentity         (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0214, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthLockLocalIdentity           (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0215, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthAddToLocalIdentityQueue     (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0205, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthRemoveFromLocalIdentityQueue (AuthParamBlockPtr     paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0206, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthSetupLocalIdentity          (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0216, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthChangeLocalIdentity         (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0217, 0xAA5E);
  
  EXTERN_API( OSErr )
  AuthRemoveLocalIdentity         (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0218, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirAddRecord                    (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0109, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirDeleteRecord                 (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x010A, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirEnumerateGet                 (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0111, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirEnumerateParse               (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0101, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirFindRecordGet                (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0140, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirFindRecordParse              (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0141, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirLookupGet                    (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0117, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirLookupParse                  (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0102, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirAddAttributeValue            (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x010B, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirDeleteAttributeValue         (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x010C, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirDeleteAttributeType          (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0130, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirChangeAttributeValue         (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x010D, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirVerifyAttributeValue         (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x010E, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirFindValue                    (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0126, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirEnumerateAttributeTypesGet   (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0112, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirEnumerateAttributeTypesParse (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0103, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirAddPseudonym                 (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x010F, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirDeletePseudonym              (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0110, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirAddAlias                     (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x011C, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirEnumeratePseudonymGet        (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0113, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirEnumeratePseudonymParse      (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0104, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirGetNameAndType               (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0114, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirSetNameAndType               (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0115, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirGetRecordMetaInfo            (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0116, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirGetDNodeMetaInfo             (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0118, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirGetDirectoryInfo             (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0119, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirGetDNodeAccessControlGet     (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x012A, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirGetDNodeAccessControlParse   (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x012F, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirGetRecordAccessControlGet    (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x012C, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirGetRecordAccessControlParse  (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0134, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirGetAttributeAccessControlGet (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x012E, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirGetAttributeAccessControlParse (DirParamBlockPtr     paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0138, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirEnumerateDirectoriesGet      (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x011A, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirEnumerateDirectoriesParse    (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0106, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirMapPathNameToDNodeNumber     (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0122, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirMapDNodeNumberToPathName     (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0123, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirGetLocalNetworkSpec          (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0124, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirGetDNodeInfo                 (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0125, 0xAA5E);
  
  /*  Trap Dispatchers for Personal Catalog and CSAM Extensions */
  EXTERN_API( OSErr )
  DirCreatePersonalDirectory      (DirParamBlockPtr       paramBlock)                         FIVEWORDINLINE(0x7000, 0x1F00, 0x3F3C, 0x011F, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirOpenPersonalDirectory        (DirParamBlockPtr       paramBlock)                         FIVEWORDINLINE(0x7000, 0x1F00, 0x3F3C, 0x011E, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirClosePersonalDirectory       (DirParamBlockPtr       paramBlock)                         FIVEWORDINLINE(0x7000, 0x1F00, 0x3F3C, 0x0131, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirMakePersonalDirectoryRLI     (DirParamBlockPtr       paramBlock)                         FIVEWORDINLINE(0x7000, 0x1F00, 0x3F3C, 0x0132, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirAddDSAM                      (DirParamBlockPtr       paramBlock)                         FIVEWORDINLINE(0x7000, 0x1F00, 0x3F3C, 0x011D, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirInstantiateDSAM              (DirParamBlockPtr       paramBlock)                         FIVEWORDINLINE(0x7000, 0x1F00, 0x3F3C, 0x0127, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirRemoveDSAM                   (DirParamBlockPtr       paramBlock)                         FIVEWORDINLINE(0x7000, 0x1F00, 0x3F3C, 0x0120, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirAddDSAMDirectory             (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0133, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirGetExtendedDirectoriesInfo   (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0136, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirGetDirectoryIcon             (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0121, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirAddADAPDirectory             (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0137, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirRemoveDirectory              (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0135, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirNetSearchADAPDirectoriesGet  (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0108, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirNetSearchADAPDirectoriesParse (DirParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0105, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirFindADAPDirectoryByNetSearch (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0107, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirGetOCESetupRefNum            (DirParamBlockPtr       paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0128, 0xAA5E);
  
  EXTERN_API( OSErr )
  DirAbort                        (DirParamBlockPtr       paramBlock)                         FIVEWORDINLINE(0x7000, 0x1F00, 0x3F3C, 0x011B, 0xAA5E);
  
  EXTERN_API( OSErr )
  OCESetupAddDirectoryInfo        (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x0219, 0xAA5E);
  
  EXTERN_API( OSErr )
  OCESetupChangeDirectoryInfo     (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x021B, 0xAA5E);
  
  EXTERN_API( OSErr )
  OCESetupRemoveDirectoryInfo     (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x020D, 0xAA5E);
  
  EXTERN_API( OSErr )
  OCESetupGetDirectoryInfo        (AuthParamBlockPtr      paramBlock,
                                   Boolean                async)                              THREEWORDINLINE(0x3F3C, 0x020E, 0xAA5E);
  
  endif  /* CALL_NOT_IN_CARBON */
  
  if PRAGMA_STRUCT_ALIGN
      #pragma options align=reset
  #elif PRAGMA_STRUCT_PACKPUSH
      #pragma pack(pop)
  #elif PRAGMA_STRUCT_PACK
      #pragma pack()
  endif
  
  ifdef PRAGMA_IMPORT_OFF
  #pragma import off
  #elif PRAGMA_IMPORT
  #pragma import reset
  endif
  
  ifdef __cplusplus
  }
  endif
  
  endif /* __OCEAUTHDIR__ */
  
  

---

[] readme course(s) preface I 1 2 II 3 4 III 5 6 7 IV 8 9 10 V 11 12 afterthought(s) appendix reference(s) example(s) resource(s) _

---

(C) Æliens 04/09/2009

You may not copy or print any of this material without explicit permission of the author or the publisher. In case of other copyright issues, contact the author.